XP-142E Operator's Guide-TUT-XP142-1.1E.pdf.pdf - 第29页

Saving the Production Information Log A production information log can be stored at the machine. Because this occurs on the machine, only the production information for that machine is stored. Procedure 1. At the [Main] …

Setting the Recovery Times

This value is used for the limit of consecutive recovery attempts in response

to pick-up or part inspection errors.

Procedure

1. At the [Main] screen, press [Maintenance A] then [0peration

Settings] to display the [0peration Settings] screen.

2. At the [Recovery Times] (upper right of screen), press the field

to display the numeric key. Enter the desired recovery times,

then press [CR].

3. Press [Close] to return to the [Main] menu.

Production Information Display

Production information can be displayed at the machine. Because this occurs

on the machine, only the production information for that machine displays.

Procedure

1. At the [Main] screen, press the [Production] button.

2. Press the [Production Data] button.

Chapter 3: Preparing for Production

TUT-XP142-1.1E

3-5XP-142E Operator’s Guide

Saving the Production Information Log

A production information log can be stored at the machine. Because this

occurs on the machine, only the production information for that machine is

stored.

Procedure

1. At the [Main] screen, press the [Production] button.

2. Press the [Production Data] button. The user can then specify

the desired “log save” (new log registration start) timing.

Note: Events are always being registered in the log, and the log is saved to a

file at the following times:

1. Whenever the user presses the [Production Info Save] button.

2. When the machine is shut down.

3. When a recipe is selected (recipe change).

4. When the date is changed.

Chapter 3: Preparing for Production

TUT-XP142-1.1E

3-6 XP-142E Operator’s Guide

Changing the Production Program

Follow the procedure below to change the production program.

Note: Refer to the host system operation manual for the procedure for

transmitting production programs.

Procedure

1. At the [Main] screen, press [Production] then [Select Program]

to display the [Select Program] dialog box.

2. Click the [▼] button to select the location where the program

file is saved.

Hard disk: /sd0

Floppy disk: /fd0

A list of the available programs is displayed in a dialog box.

3. Select the desired program from the list, then press the

[Download] button to load that program. The name of the

loaded program displays on the title bar at the top of the

screen, indicating that this program is now active.

Note: If the nozzle arrangement in the program does not match the nozzles at

the machine, a warning message will be displayed. To produce with the

nozzles in the machine, press [YES]. Press [NO] and the [Nozzle

Editor] screen is displayed. Please refer to the XP-142E System

Reference manual for an explanation of the nozzle editor.

3.2 Production Programs

Chapter 3: Preparing for Production

TUT-XP142-1.1E

3-7XP-142E Operator’s Guide