XP-142E Operator's Guide-TUT-XP142-1.1E.pdf.pdf - 第62页

XP-142E Operator ’s Guide Edition Date Notes 1.0 June 16, 2003 1.1 September 10, 2003 FUJI Manufacturing Co., Ltd. SMT Equipment 19 Chausuyama, Y amamachi, Chiryu, Aichi Prefectur e, 472-8686 Japan Copyright  2003 by Fu…

100%1 / 62
All panels remaining in the main conveyor can be unloaded.
Procedure
1.
At the [Main] screen, press [Manual Operation] then [Conveyor
Operation].
2. Find [Other], then press [Unload Panel].
The panel can be clamped or unclamped by raising or lowering the main
lifter.
Procedure
1. At the [Main] screen, press [Manual Operation] then [Conveyor
Operation].
2. Find [Main Station], then press one of the following: [MAIN
LIFTER UP] or [MAIN LIFTER DOWN].
8.4 Panel Lifter Up/Down
8.3 Unloading Panels
Chapter 8: Production Support Functions
TUT-XP142-1.1E
8-3XP-142E Operator’s Guide
This operation mode allows panels to pass through the machine from the
previous machine station to the next machine when there are no parts in the
relevant recipe that are specified to be placed using this machine. This
operation is referred to as the "Pass Mode Operation".
Procedure
1. At the [Main] screen, press [Maintenance A] then [Operation
Settings] to display the [Operation Settings] screen.
2. Press [Pass] at the upper left of the screen where [Production],
[Idle 1], [Idle 2] and [Pass] are displayed.
3. Press the START button to begin production in the PASS
mode.
8.5 Pass Mode Operation
Chapter 8: Production Support Functions
TUT-XP142-1.1E
8-4 XP-142E Operator’s Guide
XP-142E Operator’s Guide
Edition Date Notes
1.0 June 16, 2003
1.1 September 10, 2003
FUJI Manufacturing Co., Ltd.
SMT Equipment
19 Chausuyama, Yamamachi, Chiryu,
Aichi Prefecture, 472-8686 Japan
Copyright 2003 by Fuji Machine Manufacturing Co., Ltd.
Printed in Japan