XP-142E Operator's Guide-TUT-XP142-1.1E.pdf.pdf - 第58页
Chapter 8 Production Support Functions 8.1 Setting the Production Start Sequence 8.2 Loading a New Panel 8.3 Unloading Panels 8.4 Panel Lifter Up/Down 8.5 Pass Mode Operation TUT -XP142-1.1E 8-1 XP-142E Operator ’s Guide
Notes
Chapter 7: Maintenance
TUT-XP142-1.0E
7-10 XP-142E Operator’s Guide
Chapter 8
Production Support Functions
8.1 Setting the Production Start Sequence
8.2 Loading a New Panel
8.3 Unloading Panels
8.4 Panel Lifter Up/Down
8.5 Pass Mode Operation
TUT-XP142-1.1E
8-1XP-142E Operator’s Guide
It is possible to set the sequence from which production is to start.
Procedure
1. At the [Automatic] screen, select [Start number].
2. Use the numeric keypad to input the number of the sequence
from which production is to start, then press [CR].
3. Press the START button.
Note: If fiducial mark acquisition has not been completed for the panel on the
main conveyor, production will start from the specified sequence but
after the fiducial marks are read.
A new panel can be loaded onto the main conveyor by means of a command
operation.
Procedure
1. At the [Main] screen, press [Manual Operation] then [Conveyor
Operation].
2. Find [Other], then press [Load New Panel].
8.2 Loading a New Panel
8.1 Setting the Production Start Sequence
Chapter 8: Production Support Functions
TUT-XP142-1.1E
8-2 XP-142E Operator’s Guide