XP-142E Operator's Guide-TUT-XP142-1.1E.pdf.pdf - 第27页
Setting Error Handling The machine can be set to react differently to a parts error . Parts error refers to parts pick-up and parts inspection errors. There are three modes of responding to a parts error , “Auto Recovery…
Setting the Production Mode
The production mode can be set to [Automatic], [Step], or [Pause], which are
explained below.
Automatic: Select this mode for production. All sequences in the
program are performed continuously.
Step: Select this mode for test operation. The program is executed
one step at a time.
Pause: Select this mode for test operation. The program is divided
into multiple cycles and executed.
Procedure
1. At the [Main] screen, press [Maintenance A] then [Operation
Settings] to display the operation settings [Select Mode] page.
2. At the [Production Mode] field at the left of the screen, select
the mode to be used.
3. Press [Close] to return to the [Main] screen.
Chapter 3: Preparing for Production
TUT-XP142-1.1E
3-3XP-142E Operator’s Guide
Setting Error Handling
The machine can be set to react differently to a parts error. Parts error refers
to parts pick-up and parts inspection errors. There are three modes of
responding to a parts error, “Auto Recovery”, “Error Stop” and “Error Pass”
which can be changed by the operator.
Auto Recovery The machine will repeat a sequence it failed to carry out
(due to a pick-up miss or part inspection error) up to the
specified number of times (this is referred to as the
”Recovery Times”).
Error Stop The machine stops if a pick-up miss or part inspection
error occurs.
Error Pass The machine ignores pick-up miss or part inspection
errors, and continues operation.
Procedure
1. At the [Main] screen, press [Maintenance A] then [Operation
Settings] to display the [Operation Settings] screen.
2. At the [Error Handling] field at the left of the screen, select the
desired mode from the “Auto Recovery”, “Error Stop”, “Error
Pass” candidates.
3. Press [Close] to return to the [Main] screen.
Chapter 3: Preparing for Production
TUT-XP142-1.1E
3-4 XP-142E Operator’s Guide
Setting the Recovery Times
This value is used for the limit of consecutive recovery attempts in response
to pick-up or part inspection errors.
Procedure
1. At the [Main] screen, press [Maintenance A] then [0peration
Settings] to display the [0peration Settings] screen.
2. At the [Recovery Times] (upper right of screen), press the field
to display the numeric key. Enter the desired recovery times,
then press [CR].
3. Press [Close] to return to the [Main] menu.
Production Information Display
Production information can be displayed at the machine. Because this occurs
on the machine, only the production information for that machine displays.
Procedure
1. At the [Main] screen, press the [Production] button.
2. Press the [Production Data] button.
Chapter 3: Preparing for Production
TUT-XP142-1.1E
3-5XP-142E Operator’s Guide