XP-142E Operator's Guide-TUT-XP142-1.1E.pdf.pdf - 第47页
The machine stops automatically once the scheduled production quantity is produced. Refer to "Setting the Scheduled Production Quantity" in section 3.2, regarding the procedure for setting the scheduled product…
Chapter 6
Finishing Production
6.1 Stopping Automatically Upon Completion of the Scheduled
Production Quantity
6.2 Stopping Automatically after Current Panel Is Completed
TUT-XP142-1.1E
6-1XP-142E Operator’s Guide
The machine stops automatically once the scheduled production quantity is
produced. Refer to "Setting the Scheduled Production Quantity" in section
3.2, regarding the procedure for setting the scheduled production quantity.
During the course of production it is possible to automatically stop the
machine once the panel(s) currently on the main conveyor is completed and
unloaded from the machine.
Procedure
1. Press [Finish Current Panels] while production on the machine
is in progress.
2. Once production of the panel(s) currently being produced
(panel on the main conveyor) is finished and the panel is
unloaded from the machine, the machine will automatically
stop.
6.2 Stopping Automatically after Current
Panel Is Completed
6.1 Stopping Automatically Upon Completion
of the Scheduled Production Quantity
Chapter 6: Finishing Production
TUT-XP142-1.1E
6-2 XP-142E Operator’s Guide
Chapter 7
Maintenance
7.1 Emptying the Waste Tape Box <if so equipped> (Every 8 Hours)
7.2 Emptying the Parts Reject Box and Tray (Every Day)
7.3 Cleaning the Nozzle Interior (Every Week)
7.4 Cleaning the Gauge Chip Parts (Every Week)
7.5 Cleaning the Vacuum Pump Filter (Every Week)
7.6 Cleaning the Strobe Light Half Mirror and Prism surface
(Every Week)
7.7 Cleaning the Machine Interior (Every Week)
TUT-XP142-1.0E
7-1XP-142E Operator’s Guide