XP-142E Operator's Guide-TUT-XP142-1.1E.pdf.pdf - 第34页

Nozzle Replacement Set nozzles in the placing head. The placing head holds 12 nozzles (No.1 to No.12). Refer to the nozzle data in the production recipe to verify that the correct nozzles are being set. Procedure 1. At t…

100%1 / 62
Attaching the MFU
Procedure
1. Open the safety cover.
2. Slowly push the MFU into the machine to secure it.
3. At the [Main] screen, press [Manual Operation] then [STAGE1
MFU Clamp] or [STAGE2 MFU Clamp]. Press the START
button.
4. Close the safety cover.
Removing the MFU
Procedure
1. At the [Main] screen, press [Manual Operation] then [Retract
Head]. Press the START button.
2. At the [Main] screen, press [Manual Operation] then [STAGE1
MFU Unclamp] or [STAGE2 MFU Unclamp]. Press the START
button.
3. Open the safety cover.
4. Slowly pull the MFU away from the machine to remove it.
Chapter 3: Preparing for Production
TUT-XP142-1.1E
3-10 XP-142E Operator’s Guide
Nozzle Replacement
Set nozzles in the placing head. The placing head holds 12 nozzles (No.1 to
No.12). Refer to the nozzle data in the production recipe to verify that the
correct nozzles are being set.
Procedure
1. At the [Main] screen, press [Manual Operation], then [Move to
nozzle change position] to display the nozzle change position
dialog box.
2. Input the position to move the head to, and push START to
move the head to the nozzle change position. The MFU will
automatically unclamp (if the machine does not have fixed
devices).
3. Push the nozzle up, rotate to release, and remove. Push in
the new nozzle and rotate to lock into position.
XP1T3002Ea
Pin
3.4 The Machine
Chapter 3: Preparing for Production
TUT-XP142-1.1E
3-11XP-142E Operator’s Guide
4. After changing the nozzle, at the [Main] screen, press [Manual
Operation] then [STAGE1 MFU Clamp] or [STAGE2 MFU
Clamp]. Press the START button.
Caution: After replacing a nozzle, always conduct a nozzle size check.
([Main] - [Production] - [Nozzle Editor] - [Size Check]). Conduct a
nozzle size check even when replacing nozzles of the same
diameter.
Chapter 3: Preparing for Production
TUT-XP142-1.1E
3-12 XP-142E Operator’s Guide