XP-142E Operator's Guide-TUT-XP142-1.1E.pdf.pdf - 第7页
Notes T able of Contents TUT -XP142-1.1E iv XP-142E Operator ’s Guide
Chapter 7: Maintenance TUT-XP142-1.0E
7.1 Emptying the Waste Tape Box <if so equipped>
(Every 8 Hours) ................................................................7-2
7.2 Emptying the Parts Reject Box and Trays (Every Day)....7-3
7.3 Cleaning the Nozzle Interior (Every Week) ......................7-4
7.4 Cleaning the Gauge Chip Parts (Every Week) ................7-5
7.5 Cleaning the Vacuum Pump Filter (Every Week) ............7-6
7.6 Cleaning the Strobe Light Half Mirror and Prism Surface
(Every Week) ....................................................................7-8
7.7 Cleaning the Machine Interior (Every Week)....................7-9
Chapter 8: Production Support Functions TUT-XP142-1.1E
8.1 Setting the Production Start Sequence ............................8-2
8.2 Loading a New Panel........................................................8-2
8.3 Unloading Panels..............................................................8-3
8.4 Panel Lifter Up/Down........................................................8-3
8.5 Pass Mode Operation ......................................................8-4
Table of Contents
TUT-XP142-1.1E
iiiXP-142E Operator’s Guide
Notes
Table of Contents
TUT-XP142-1.1E
iv XP-142E Operator’s Guide
About This Manual
Manual Structure
This manual has been created to familiarize the operator with standard operating procedures. The
procedures included are split into several steps, each of which should be read and then carried out
at the machine. The manual itself is also split into several chapters, and after an initial introduc-
tion to the machine, the order of the chapters is designed to roughly reflect the order in which the
machine will be operated during actual production. For a more detailed explanation of machine
operation and workings, refer to the XP-142E System Reference or XP-142E Mechanical
Reference manuals.
Chapter 1: Machine Configuration
This chapter provides illustrations and basic introductions to each of the major components of the
machine.
Chapter 2: Starting and Stopping the Machine
This chapter explains how to start and stop the machine, and select the various operation modes.
Chapter 3: Preparing for Production
This chapter explains how to select a recipe, set the production quantity, and perform other opera-
tions necessary to ready the machine for production.
Chapter 4 Starting Production
This chapter explains how to ready and check the nozzles, load a panel, and then commence oper-
ation.
Chapter 5: Stopping the Machine
This chapter describes the various ways in which the machine can be stopped.
Chapter 6: Finishing Production
This chapter describes the procedure for stopping automatically upon completion of the scheduled
lot or the current panel.
Chapter 7: Maintenance
Routine maintenance procedures are detailed in this chapter.
Chapter 8: Production Support Functions
Several other procedures that may be performed during operation are detailed in this chapter.
About This Manual
TUT-XP142-1.1E
1XP-142E Operator’s Guide