00194103-01.pdf - 第17页
User Manual SIPLAC E F5 HM 1 Introduction Software Version SR.408.xx 03/ 2006 US Edition 1.7 Revisions since 01/2001 edition 17 1.7 Rev isions since 01/20 01 edition 1 1 1.8 Rev isions since 03/20 06 edition 1 New or mod…
1 Introduction User Manual SIPLACE F5 HM
1.5 EU Declaration of Conformity Software Version SR.408.xx 03/2006 US Edition
16
1.5 EU Declaration of Conformity
The product/device described below 1
Product: Placement machine
Type: SIPLACE F5 HM
Item no.: 00117550 1
manufactured by 1
SIEMENS AG, Automation and Drives
Electronics Assembly Systems
Rupert-Mayer-Str. 44
D-81359 Munich 1
conforms to the relevant provisions of: 1
– Directive 98/37/EC of the European Parliament and of the Council of June 22, 1998 on
the approximation of the laws of the Member States relating to machinery
– Council Directive 89/336/EEC of May 3, 1989 on the approximation of the laws of the
Member States relating to electromagnetic compatibility
The product(s) identified above comply with the requirements of the above EU directive by meet-
ing the following standards: 1
EN 294, EN 349, EN 418, EN 811, EN 1050, EN ISO 12100-1, EN ISO 12100-2,
EN 60204-1, EN 60825-1, EN 61000-3-2/3, EN 61000-4-2/3/4/5/6/8
1)
1
1.6 Revision index
1
1
1) This declaration certifies the compliance with the indicated directives but implies no warranty of properties.
The safety instructions of the accompanying product documentation shall be observed.
Manual Software version Edition
First edition User manual 406.xx 02/2000 US
Revision User manual 407.xx 01/2001 US
Revision User manual 408.xx 03/2006 US
User Manual SIPLACE F5 HM 1 Introduction
Software Version SR.408.xx 03/2006 US Edition 1.7 Revisions since 01/2001 edition
17
1.7 Revisions since 01/2001 edition
1
1
1.8 Revisions since 03/2006 edition
1
New or modified Chapter/section
Warning labels on the machine 2.1.5
Additional warning labels for the NAFTA region 2.1.6
Safety instructions for processing capacitors based on powdered
metal
2.1.15
Feeder module 10.1.1
Safety instructions for processing capacitors based on powdered
metal
10.1.2
12 mm S feeder for capacitors based on powdered metal, model
C/D
10.2.5
12 mm S feeder for capacitors based on powdered metal, model E 10.2.6
Optical centering with the multi-color PCB camera 11.5.6
Fine calibration 11.13
New or modified Chapter/section
Introduction
1
Operational safety 2
Description of the machine 3.1
Performance data 3.2
The line concept 3.3
Technical data – Ratings 3.5
Dimensions and weight of the placement system 3.6
Controls 3.7
Placement heads 3.9
PCB dual conveyor 3.12
Adjusting the component trolley to another PCB transport height 4.3
Tasks on the machine 5
Feeder modules 6.1
Technical data for the S feeder modules 6.2
Component trolley 6.3
1 Introduction User Manual SIPLACE F5 HM
1.8 Revisions since 03/2006 edition Software Version SR.408.xx 03/2006 US Edition
18
PCB barcode
7.4
Ceramic substrate centering 7.5
Flip-chip vision module for the Pick&Place head 7.8
Coplanarity laser module 7.9
DCA vision camera 7.10
SIPLACE productivity lift 7.12
PCB support 7.13
New or modified Chapter/section