00194103-01.pdf - 第208页
7 Options User Manual SIP LACE F5 HM 7.9 Coplanarity laser module Software Version SR.408.xx 03/2006 US Edition 208 Fig. 7.9 - 3 Coplanarity laser m odule - Analysis unit (1) Green LED: 5V opera ting vol tage (2) Green L…
User Manual SIPLACE F5 HM 7 Options
Software Version SR.408.xx 03/2006 US Edition 7.9 Coplanarity laser module
207
7.9.4 Overview
7.9.4.1 Analysis unit
The coplanarity laser module consists of two components: the analysis unit with its control sec-
tion, and the laser module. The analysis unit is located in the control unit (see Fig. 7.9 - 3
). The
operating state is indicated by three green LEDs on the front panel of the analysis unit:
Press the RESET key to initialize the coplanarity laser module.
7.9.4.2 Laser module
The laser module is fixed to a supporting frame on the right-hand side of the machine (see Fig.
7.9 - 4
). Two red LEDs and one green LED signal the operating states of the laser module:
LED (see 7.9 - 3
) On Off
1 green 5 operating voltage No voltage
2 green 12V operating voltage No voltage
3 green Laser module in use Laser module switched off
LED (see Fig. 7.9 - 4) On Off
4 red OUT OF RANGE
(outside the measuring range)
–
5 red POOR TARGET
(component is insufficiently reflec-
tive)
–
6 green Laser module in use Laser module switched off
7 Options User Manual SIPLACE F5 HM
7.9 Coplanarity laser module Software Version SR.408.xx 03/2006 US Edition
208
Fig. 7.9 - 3 Coplanarity laser module - Analysis unit
(1) Green LED: 5V operating voltage
(2) Green LED: 12V operating voltage
(3) Green LED: laser module switched on
(4) RESET key
(5) SUB-D plug, 9-pin, COM2: to the machine controller
(6) SUB-D plug, 15-pin: to the laser module
(7) Analysis unit with control section
(8) Control unit
User Manual SIPLACE F5 HM 7 Options
Software Version SR.408.xx 03/2006 US Edition 7.9 Coplanarity laser module
209
Fig. 7.9 - 4 Coplanarity module
(1) Laser module
(2) Connecting cable
(3) Supporting frame
(4) Red LED: OUT OF RANGE
(5) Red LED: POOR TARGET
(6) Green LED: LASER ON