00194103-01.pdf - 第199页

User Manual SIPLAC E F5 HM 7 Options Software Vers ion SR.408.xx 03/2006 U S Edition 7.7 Nozzle changer for the Pick&Place head 199 7.7 Nozzle chan ger for the Pick&P lace head 7.7. 1 Ove rview Fig. 7.7 - 1 Insta…

7 Options User Manual SIPLACE F5 HM

7.6 Multicolor PCB camera (type 18) Software Version SR.408.xx 03/2006 US Edition

198

– Blue oblique lighting:

In most cases, this can be used to greatly improve the contrast with bright fiducials on a light

base material, such as ceramic or CEM (c

omposite electrochemical materials). Fiducials cov-

ered with solder resist can also be detected better on a light background.

– Infrared lighting

This type of illumination is particularly useful for fiducials that are covered with solder resist or

for fiducials on flex materials. It is also sometimes possible to improve detection of silver/plat-

inum fiducials on ceramic. This should be tested by carrying out a test centering or placement

run.

User Manual SIPLACE F5 HM 7 Options

Software Version SR.408.xx 03/2006 US Edition 7.7 Nozzle changer for the Pick&Place head

199

7.7 Nozzle changer for the Pick&Place head

7.7.1 Overview

Fig. 7.7 - 1 Installation location of the nozzle changer for the Pick&Place head

(1) Magazine for 5 nozzles

(2) Reject bin

(3) Support plate

7 Options User Manual SIPLACE F5 HM

7.7 Nozzle changer for the Pick&Place head Software Version SR.408.xx 03/2006 US Edition

200

The SIPLACE F5 HM placement machine is equipped with a nozzle changer for the Pick&Place

head as standard. It is supplied with a nozzle magazine for five nozzles, for example four stan-

dard nozzles from the 4xx series and one special nozzle. Three additional nozzle magazines

may be retrofitted if required, providing up to 20 nozzles.

7.7.2 Technical data - Nozzle changer for the Pick&Place head

7.7.3 Description of the functions

Fig. 7.7 - 2 Nozzle changer overview

Nozzle types All nozzles from the 4xx series, special nozzle (optional)

Capacity 1 to 4 magazines, each with 5 nozzles, may be configured as

required

Nozzle changeover time approx. 2 sec. per nozzle

(1) Positioning fiducial

(2) Nozzle garage

(3) Reject bin

(4) Magazine 1 (standard)

(5) Magazine 2 to 4 (optional)