00197624-02_IM_708.1_DE_EN.pdf - 第15页

Station Software 708.1 / Installation Manual Ausgabe 05/2015 E dition 15 4.1.3 Embedded S oftware You will find the used eS W versions liste d in the eSW_Firmwa re_Files.txt fil e in the Document ation directory on the i…

100%1 / 100
Station Software 708.1 / Installation Manual Ausgabe 05/2015 Edition
14
4 Requirements
4.1 Software Components of SIPLACE Series X, X S, SX, DX and CA
4.1.1 Station
The station only uses one of the following operating system configurations on the machine
computer and Coplan computer:
– Microsoft Windows Embedded Standard 7 (WES7, 32-bit or 64-bit)
The station computer has to be equipped with at least 2 GB memory with WES 7, 32-bit and 4 GB
memory with WES7, 64-bit respectively. If necessary, station computers in the field have to be
exchanged or upgraded with a memory extension. Please refer to the Technical Information
TI2014-09E04.
4.1.2 Machine Components
The following versions of other machine components are required for the station software to
function correctly:
SIPLACE station software SIPLACE Vision SIPLACE Pro
Version 708.1 Version 522 Version 12.1*)
*) in compatible mode 707.3©: SIPLACE Pro 11.x.
CAUTION
The functional statuses of the station computer, Vision computer and SIPLACE Pro
software must be compatible, as specified above. Another configuration is not supported.
Station Software 708.1 / Installation Manual Ausgabe 05/2015 Edition
15
4.1.3 Embedded Software
You will find the used eSW versions listed in the eSW_Firmware_Files.txt file in the Documentation
directory on the installation DVD.
4.1.3.1 Composition of the File Name
1..6 7 8 9 10 11 12 13 14 15 16 17 18 19
Sub-
system
name
Sepa-
rator
Variant ID Hard-
ware ID
1)
Target
2)
Version Release . File type
See table
in section
4.1.3.2
_ 0 = no
variant
00
0 = BIOS 00
H
00
H
. HEX
_ A =
Variant
(SOKO)
…
1 = App 1 … … . JED
_ ... 99 2 = App 2 FF
H
FF
H
. BHX
Table 4-1: Composition of the file name
1)
Change compared with old file name (from one to 2 digits)
2)
Extended to second CAN
Station Software 708.1 / Installation Manual Ausgabe 05/2015 Edition
16
4.1.3.2 Comparison of Old and New Names of the Subsystems
Old subsystem name
(<70x)
New subsystem name
(70x)
Name
A AXIALL General axes (including free axis),
excluding DP axes of the C&P20A head
B COMTAB Component table
C VHSAXS Star axis of C&P20A head
E IOMODU CAN I/O module
F (Replaced by AXIALL) Free axis
G TAPCUT Tape cutter
H VHSHED C&P20A head
I TWIHED Twin Head
J VHSAXD DP axis of C&P20A head
L TWIAPR / VHSAPR Pressure regulation valve
(Twin Head / C&P20 head)
M MTCHNG MTC
N ---
O ---
P TWIAXZ Z-axis, Twin Head
Q ---
R TWIAXD DP axis, Twin Head
T CONVEY PCB conveyor
U FEEDER Feeder
V ILLUMI Vision
W VHSAXZ Z-axis, C&P20A head
X GANAXX X-axis
Y GANAXY Y-axis
--- CCPAPR
1)
Pressure regulation valve, CPP head
--- CPPAVA
1)
Valve cluster, CPP head
--- CPPAXD
1)
DP axis, CPP head
--- CPPHED
1)
CPP head
--- CPPSCO
1)
Component sensor