Micron Technical Reference V9 Volume 4.pdf - 第106页
SENSORS TEMPERATURE AND HUMIDITY S ENSOR 40.20 Technical Reference Manual Chapter Issue 5, Jan 16
SENSORS
TEMPERATURE AND HUMIDITY SENSOR
Chapter Issue 5, Jan 16 Technical Reference Manual 40.19
TEMPERATURE AND HUMIDITY SENSOR
The temperature and humidity sensor is an integral part of the print carriage
I/O Node 3 PCB and as such there is no adjustment and setting available for
this sensor.
SENSORS
TEMPERATURE AND HUMIDITY SENSOR
40.20 Technical Reference Manual Chapter Issue 5, Jan 16
PREVENTIVE MAINTENANCE
INTRODUCTION
Chapter Issue 7, Jan 15 Technical Reference Manual 41.1
CHAPTER 41 PREVENTIVE MAINTENANCE
INTRODUCTION
This maintenance schedule is a recommended programme which should be
carried out on a daily basis.
NOTE
There is a monthly maintenance schedule which is detailed in a separate
manual, Micron Maintenance Manual, part number 167152.
The daily schedule can be performed by a suitably trained operator and should
take approximately 15 minutes to complete. The tasks are generally limited to
surface cleaning and minor inspections.
If any items or parts are found to be defective, escalate to a suitably trained
engineer.
Material Safety
Data Sheets
Material Safety Data Sheets (MSDS) listing the health and safety aspects
applicable to cleaning materials are available on request from the purchase
source.
If difficulty is experienced in obtaining an MSDS, assistance is available from
ASM.
Contact your local ASM agent.
Cleaning Equipment
Disposal of Waste
Materials
All waste materials including fluids and contaminated materials must be dis-
posed of in accordance with national, federal or local legislation.
Description Part Number
IPA Impregnated Wipes 115806
Plastic Spatula (white) 173737
Plastic Spatula (green) 173788
Plastic Spatula (black) Antistatic 173825