Micron Technical Reference V9 Volume 4.pdf - 第189页

TRANSPORTATION - MAJOR RELOCATION TRANSIT BRACKETS AND SCREWS REMOVAL Chapter Issue 2, Jul 16 Technical Reference Manual 43.49 10. Loosen the M8 nut (3) that secures the left chase transit bracke t (5) to the chase on th…

TRANSPORTATION - MAJOR RELOCATION

TRANSIT BRACKETS AND SCREWS REMOVAL

43.48 Technical Reference Manual Chapter Issue 2, Jul 16

7. Loosen the transit adjustment screw lock nut (15) on the rear chase transit

bracket (12).

Figure 43-17 Rear Chase Transit Bracket

8. Using a 6mm Allen key, loosen the transit adjustment screw (7), on both the

left chase transit brackets (5), and the transit adjustment screw (11) on the

rear chase transit bracket (12), so that the chase comes into contact with

the three actuator shafts.

9. Using a 5mm Allen key, remove the rear chase transit bracket (12) by

removing the M6 cap head screw (13) and M6 washer (14).

Item Description Item Description

11 Transit Adjustment Screw 14 M6 Washer

12 Rear Chase Transit Bracket 15 Transit Adjustment Screw Lock Nut

13 M6 Cap Head Screw

View on Right Hand Underside

TRANSPORTATION - MAJOR RELOCATION

TRANSIT BRACKETS AND SCREWS REMOVAL

Chapter Issue 2, Jul 16 Technical Reference Manual 43.49

10. Loosen the M8 nut (3) that secures the left chase transit bracket (5) to the

chase on the front and rear transit brackets.

11. Unscrew the M8 chase studs (1) from the chase and remove from the

machine.

12. Remove the two left chase transit brackets (5) from the machine.

13. Remove the two right hand chase studs (1) by loosening the two M8 nuts

(3) that secure the chase studs (1) to the chase.

NOTE

The transit screws are constructed of a red plastic dome head nut and a 45mm

steel grub screw. Although the two parts are bonded, ensure that both parts are

removed if they become separated.

Squeegee Transit

Screws

1. Snip the cable ties securing the piece of card to the front of the squeegee

mechanism. Remove the cable ties and the piece of card from the machine.

2. Whilst supporting the squeegee mechanism, remove the two squeegee

transit screws.

Squeegee Transit Screws

Squeegee Mechanism Squeegee Mount

TRANSPORTATION - MAJOR RELOCATION

TRANSIT BRACKETS AND SCREWS REMOVAL

43.50 Technical Reference Manual Chapter Issue 2, Jul 16

Print Carriage

Transit Screw

1. Loosen the M8 locking nut that secures the transit screw to the print carriage

compliant bearing block.

2. Remove the print carriage transit screw that secures the print carriage

compliant bearing block to the left linear guide rail. Ensure that the crinkle

washer below the locking nut is also removed.

3. Locate the re-sealable polythene bag taped to the print carriage.

4. Remove the plastic cap from the bag and fit into the hole that the transit

screw occupied on the left linear guide rail.

Print Carriage

Transit Screw

Print Carriage Compliant Bearing Block

Left Linear Guide Rail

Locking Nut and Crinkle Washer