00196062-03_SM_LDU-X_EN.pdf - 第77页

在线预览 00196062-03_SM_LDU-X_EN.pdf PDF 文档。

4 Service Work

4.6 Maintenance: greasing the spindle and guidance

76 Service Manual SIPLACE LDU-X Linear Dipping Unit 11/2017

4.5.6 The axes won't move

Errors: The axes suddenly stop while moving.

Display: X axis or Y axis error

Status display: Red LED lights up

Cause: The control circuit for positioning is overloaded and the control system stops

the movement.

Solution: Reduce the speed of the axis concerned (see "Parameters").

Increase the "tracking error" parameters.

4.5.7 Position Error

Errors: The axes suddenly stop while moving.

Display: Position error

Status display: Red LED lights up

Cause: The control circuit for positioning is overloaded and the control system stops

the movement.

Solution: Reduce the speed of the axis concerned (see "Parameters").

Increase the "tracking error" parameters.

4.5.8 Step Loss

Errors: The axes suddenly stop while moving.

Display:

Status display: Red LED lights up

Cause: The control circuit for positioning is overloaded and the control system stops

the movement.

Solution: Reduce the speed of the axis concerned (see "Parameters").

Increase the "tracking error" parameters.

4.6 Maintenance: greasing the spindle and guidance

All LDU-X guides and spindles must be greased every 6 months or more often if required.

Grease with ISOFLEX Topas 5051 (03078517-04).

► Grease the guidance(1) and the

spindle(2) evenly and along the whole

length.

► Also grease the spindle and guidance on

the other side of the LDU-X.

Item no.: 00196062-03 ASM Assembly Systems GmbH & Co. KG

Rupert-Mayer-Strasse 44

81379 Munich

Germany