COU2000 PRO计数器英文说明书 Operaton Manual-en(1).pdf - 第10页

VERSION: .1.01 E 10 / 52 DA T A PIT CH PRESET 000000 4mm P ock et Check(PC) ：Only appl icable to the CO UP2000EX Pro model, used to detect missing parts in tape reel There are ‘S peed Adjustment’ function and 3 work mode…

VERSION: .1.01 E

9 / 52

4. Operation guide

4.1 Basic operation

4.1.1 Power on: select a workbench which closes to the power supply, connect the power

supply, and position the cabinet onto the workbench,and make sure grounding properly.

4.1.2 Self check: press on power switch, and there will be the following

display on the LCD:

Then the display will be changed to the following

indicating that the device has finished self check.

4.1.3 Usage of operation panel:

TIME ：used to manage the time of the device; press the key to display the current time

inside the device; press this key for ten seconds to enter the time setting display:

Key in the corresponding year, month, date and time, press the TIME key,

and the display will automatically return back to:

SMD CHIP COUNTER

COU2000 SERIES

YY MM DD HH ：MM

2099 01 01 00 ：00

S2 DATA PITCH PRESET

000000 04mm

YY MM DD HH : MM

20**-**-**-** : **

VERSION: .1.01 E

10 / 52

DATA PITCH PRESET

000000 4mm

Pocket Check(PC) ：Only applicable to the COUP2000EX Pro model, used to detect missing

parts in tape reel

There are‘Speed Adjustment’function and 3 work modes for COU2000ex pro，the setting

method is as below:

Press and hold the Function key for 3 seconds to enter the function settings screen. At this

time, press and hold the Function key briefly to enter the next screen, which is as follows:

Speed Adjustment

Mode 0

Mode 1

Mode 2

Speed Adjustment Interface:

The "Speed Adjustment" method is as follows:

Press "START" or "REWIND" to select S1/S2/S3 speeds. When held still for 3 seconds, the

screen will flash once and return to the main interface

Mode setting:

MODE0 Standard counting mode：“MODE 0 Standard”

MODE1 Pocket Check mode：“MODE 1 Pocket Check”

SPEED ADJUSTMENT

S1 S2 S3

MODE 1

Pocket Check

MODE 0

Standard

VERSION: .1.01 E

11 / 52

MODE2 Transparent Tape Mode：“MODE 2 Transparent Tape”

*In each setting interface, if it remains still for 3 seconds, the screen will flash once and

return to the main interface

*When in MODE1 interface,keep still for 3 seconds to save as “Transparent Tape” status

and return to the main interface

At this time, the words’TT’and' speed S' alternate for three seconds to display

*When in MODE 2 interface，Keep still for 3 seconds to save as "Pocket Check" status and

jump back to the below screen:

At this time, the words' PC 'and' speed S' alternate for three seconds to display

Note:

if you are using the COUP2000ADV Pro model, please don’t set the mode to PC mode,

otherwise it will affect the motor rotation.

PRINT ：Print the quantity and corresponding time, and if connected to a barcode reader,

the product specification barcode can also be printed on the label. After selecting the label

printing function option and barcode copying function option, this function is effective for

the COUP2000ADV Pro and COUP2000EX Pro。

Note : printing is still valid when DATA is a non positive number.

PITCH ：According to the EIA-481 standard, the P-value of the spacing component pitch in

a reel is always:

MODE 2

Transparent Tape

PC DATA PITCH PRESET

000000 04mm