DEK INFINITY USER MANUAL.pdf.pdf - 第126页

INFINITY 0$&+,1( 352*5$ 00,1* 67$786 3$*( 1.124 User Manual Software Versi on 7

INFINITY

0$&+,1(352*5$00,1*

67$7863$*(

Software Version 7 User Manual 1.123

Process - Parameters The following table lists all the items that can be displayed in the Process -

Parameters information panel:

The Process - Parameters panel can display up to a maximum of 14 items on

Display Type 1 and 6 items on Display Type 2.

The values of the Process - Parameters are set in the product file of the loaded

product.

Rates The following table lists all the items that can be displayed in the Rates

information panel:

The Rates panel can display up to a maximum of 6 items and is only shown on

Display Type 2.

Print Mode Front Print Speed Rear Print Speed Front Pressure

Rear Pressure ProFlow System Press. Print Gap Separation Speed

Paste Dispense Rate Clean Screen Rate 1,2 Forward X Offset Forward Y Offset

Forward

θ Offset Reverse X Offset Reverse Y Offset Reverse θ Offset

Item Description

Batch Count/ Limit The first figure displays the amount of boards printed in the current batch. The second figure

displays the total amount of boards to be printed in the current batch. The batch count limit is

set in Batch Limit in the Monitor menu.

Board Count/Limit The first figure displays the amount of boards printed in the current board count. The second

figure displays the total amount of boards to be printed in the current board count. The board

count limit is set in Board Count in the Edit Data menu. The board count limit allows a

separate board count to be set within the total batch count.

Paste Disp. Cnt/Rate The first figure displays the amount of boards printed since the last paste dispense. The second

figure displays the amount of boards to be printed between each paste dispense. The paste

dispense count/rate is set in Paste Dispense Rate in the Edit Data menu.

Clean 1 Count/Rate The first figure displays the amount of boards printed since the last screen clean mode 1 was

carried out. The second figure displays the amount of boards to be printed between each screen

clean mode 1. The clean 1 count/rate is set in Screen Clean Rate 1 in the Edit Data menu.

This parameter is only displayed while a blue or silver under screen cleaner is fitted.

Clean 2 Count/Rate The first figure displays the amount of boards printed since the last screen clean mode 2 was

carried out. The second figure displays the amount of boards to be printed between each screen

clean mode 2. The clean 2 count/rate is set in Screen Clean Rate 2 in the Edit Data menu.

This parameter is only displayed while a blue or silver under screen cleaner is fitted.

Vortex Stroke/Limit The first figure displays the amount of cleaning strokes carried out since the Vortex cleaning

cassette was replaced. The second figure displays the total amount of cleaning strokes to be

carried out before the cleaning cassette needs replacing. The Vortex stroke/limit is set in Vortex

Cassette Life in the Edit Data menu. This parameter is only displayed while a Vortex under

screen cleaner is fitted.

Clean Count/Rate The first figure displays the amount of boards printed since the last Vortex screen clean was

carried out. The second figure displays the amount of boards to be printed between each Vortex

screen clean. The clean count/rate is set in Vortex Clean Rate in the Edit Data menu. This

parameter is only displayed while a Vortex under screen cleaner is fitted.

Print Direction Displays the print direction for the next board to be printed.

INFINITY

0$&+,1(352*5$00,1*

67$7863$*(

1.124 User Manual Software Version 7

INFINITY

6(735()(5(1&(6

,1752'8&7,21

Software Version 7 User Manual 2.1

CHAPTER 2 SET PREFERENCES

INTRODUCTION The Set Preferences function allows for the setting of preferred machine control

options.

To access the set preferences window proceed as follows:

1. Select Maint. (F8).

2. Select Set Prefs (F5).

The set preferences window is displayed:

The menu bar changes to give the following options:

Next and Previous move the highlight between the various parameters.

Incr. and Decr. alter the value of the highlighted parameter.

Run Head

Paste

Load

Clean

Screen

Adjust Setup Monitor Maint.

Calibrat

Pressure

Calibrat

Offset

Calibrat

Vision

House

Keeping

Set

Prefs

Diagnost

Tes t

Cycles

Exit

Set Preferences

secs

..more

TRANSPORT MODE

MACHINE UNITS

UPLINE PROTOCOL

DOWNLINE PROTOCOL

TRANSFER PERIOD

SELECTIVE PRINT/PASS

PASTE DISPENSE POS.

COMMS PROTOCOL

EVENT RECORDING

TOOLING HARDWARE

FIDUCIAL REFERENCE

PRODUCT BARCODE H/W

SCREEN BARCODE H/W

REMOTE BARCODE H/W

LEFT TO LEFT

Metric

NO FMI

ENABLED

FRONT

NO COMMS

GROUP 3

MAGNETIC

LEFT

NOT FITTED

Next Previous Incr. Decr. Exit