DEK INFINITY USER MANUAL.pdf.pdf - 第326页
INFINITY &21680$ %/(5(3/ (1,6+0(1 76 352)/2: 9.42 User Manual Software Versi on 7 17. Se lect Exit ( F8). 18. Se lect Proceed (F1). The ProFlow unit is placed in contact with the stencil. 19. Open the front printhea…
INFINITY
&21680$%/(5(3/(1,6+0(176
352)/2:
Software Version 7 User Manual 9.41
5. If the ProFlow unit’s base cover is still fitted continue with Step 6. If the
ProFlow unit’s base cover has been removed go to Step 12.
6. Select Remove Cover (F8). The message ‘Open the printer cover and
remove the ProFlow unit’s base cover’ is displayed.
7. Open the front printhead cover.
8. Remove the ProFlow unit’s base cover.
9. Close the front printhead cover.
10.Press the System button.
11. Select Exit (F8).
12.Select Yes (F1). The message ‘The ProFlow unit will be placed in the
REAR envelope’ is displayed.
13. If the ProFlow unit is required to be placed in another envelope continue with
Step 14. If the ProFlow unit is required to be placed in the machine preferred
envelope go to Step 18.
14.Select, Select Another (F8).
The following window is displayed:
15.Use the Next or Previous keys (F4 or F5) to highlight Front.
16.Select Use (F1).
Yes
Remove
Cover
Exit
Yes
Remove
Cover
Proceed
Select
Another
Preferred Envelope
REAR
FRONT
Use Next Previous Exit
Use Next Previous Exit
INFINITY
&21680$%/(5(3/(1,6+0(176
352)/2:
9.42 User Manual Software Version 7
17.Select Exit (F8).
18.Select Proceed (F1). The ProFlow unit is placed in contact with the stencil.
19.Open the front printhead cover.
20.To gain access to the transfer head (1), release the latch on the front of the
pressure mechanism (2) and raise the mechanism forward and upwards to
engage the spring locking device.
21.To release the carrier from the transfer head, unscrew the thumbscrews at
each end of the carrier to loosen the clamp brackets.
Use Next Previous Exit
Proceed
Select
Another
2
1
Thumbscrew
Thumbscrew
Loosening Carrier Brackets
INFINITY
&21680$%/(5(3/(1,6+0(176
352)/2:
Software Version 7 User Manual 9.43
22.Hinge the clamp brackets (1) outwards. Hinge the carrier and cassette (2)
towards the front of the machine exposing the top of the cassette.
23.Carefully remove the empty cassette (1) from the carrier (2) by lifting the
cassette clear of the retaining pins (3) sited at each end of the carrier unit.
24.Dispose of the empty cassette in accordance with local authority guidelines.
2
1
1
2
3
2
1
3