DEK INFINITY USER MANUAL.pdf.pdf - 第129页
INFINITY 6(735()(5( 1&(6 35()(5(1& (6 Soft ware Ver sion 7 User Manual 2.3 Select ive Print/ Pass Sets whether the facility to selective print or pass through a board is t o be used, options are: This feature is…
INFINITY
6(735()(5(1&(6
35()(5(1&(6
2.2 User Manual Software Version 7
PREFERENCES
Transport Mode Sets the input and output side of the printer, options are:
Machine Units Sets the unit of measurement, options are:
Upline Protocol Sets the protocol for transferring boards from adjacent machines, options are:
Downline Protocol Sets the protocol for transferring boards to adjacent machines, options are:
Transfer Period Sets a programmable time period used by certain transfer protocols, options are:
Period of Transfer Time - This is the period of time which the machine allows
for a transfer of a board before displaying a ‘Board Transfer Error’ for upline
or downline.
Period of Waiting Time - This is the period of time which the machine allows
when waiting for the upline or downline machine to request a board for transfer
before displaying a message of ‘Waiting for Upline/Downline’.
Options Default
Left to Right Left to Right
Right to Left
Right to Right
Left to Left
No Transfer
Options Default
Metric Metric
Imperial
Options Default
No FMI Specified by Customer
Requirements
MIU
Manual
Options Default
No FMI Specified by Customer
Requirements
MIU
Manual
Minimum Maximum Increment Default
0 Seconds 999 Seconds 1 Second 20 seconds
INFINITY
6(735()(5(1&(6
35()(5(1&(6
Software Version 7 User Manual 2.3
Selective Print/Pass Sets whether the facility to selective print or pass through a board is to be used,
options are:
This feature is protected by Feature Licence Authentication.
When enabled the identity of the incoming board is checked using a separate
fiducial on the board only, called a Select Mark. If the identity of the board
matches the current product file the board is printed. If the board is different or
cannot be recognized, it is passed through without printing.
Paste Dispense
Position
Sets the position from which paste is dispensed, in relation to the screen image,
options are:
When exiting set preferences after setting option to either Rear or Auto the
following window is displayed:
Comms Protocol Sets the communications protocol to be used for serial communications to a host
computer, options are:
The menu bar changes depending on the option chosen, see the Host
Communications Chapter for further details.
WARNING
HOST COMMUNICATIONS. BE AWARE THAT IF THE MACHINE SAFETY LOCKS
ARE DEFEATED WHILST HOST COMMUNICATIONS ARE ACTIVE, A DANGER
EXISTS WHEREBY MACHINE PARTS MAY MOVE UNEXPECTEDLY.
Options Default
Enabled Disabled
Disabled
Options Default
Front Auto
Rear
Auto
Please confirm that there will be no obstruction
when your paste dispenser dispenses paste at the
rear of the image
Paste Dispense Position
Options
GEM
Net_File
No Comms
INFINITY
6(735()(5(1&(6
35()(5(1&(6
2.4 User Manual Software Version 7
Event Recording Sets which events are recorded in the event log file, options are:
Over 200 possible events may be recorded.
On selecting Custom the following set up window opens:
The window displays how each event is logged in three possible ways; Disk,
Host (not used) and Grp.
Disk This column lists which events are logged to the disk file. The events set to ‘on’
are logged, those set to ‘off’ are not logged.
Host This column lists which events are sent to the host computer. The option is only
active if a GEM host comms interface is fitted. The events set to ‘on’ are logged,
those set to ‘off’ are not. How the host computer deals with the event logging,
depends on the host software and is not controlled by the machine.
Grp This column lists the group an event is assigned. The user can select which of
the groups are to be recorded, as follows:
Options
Custom
Group 3
Group 2
Group 1
Event Report Setting: Disk Host Grp
System Power on
System Power down
Humidity
Temperature
Batch Count
Measured Cycle Time
Throughput Cycle Time
Front Print Pressure
Rear Print Pressure
Table Separation Speed
Stretch Error
X error
Y error
Theta Error
off
off
off
off
off
off
off
off
off
off
off
off
off
off
off
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
..more
on
on
on
on
on
on
on
on
on
on
on
on
on
on
on
Set Preference Selection Event Groups Recorded
Group 1 Groups 1, 2 and 3 (all events)
Group 2 Groups 2 and 3
Group 3 Group 3