DEK INFINITY USER MANUAL.pdf.pdf - 第267页
INFINITY ',163(& 7,21 ',163(&7,2 16(7 83 Soft ware Ver sion 7 User Manual 8.27 9. Select Use Limit . Lighting Setup 1. Select Ligh t Setup . Figur e 8-8 Green Camera Lighting Parameters 2. Using th…
INFINIT
Y
',163(&7,21
',163(&7,216(783
8.26 User Manual Software Version 7
NOTE
The message ‘Use the mouse in the stencil view window to position and size
the site or edit the parameters’ is displayed in the message prompt bar.
5. Adjust the following edit site parameters to suit the required application:
• Site Priority
• Stencil Inspect Type
• Board Inspect Type
• Site Alignment
• Site Limit ID
6. Highlight site limit ID using the Next and Previous keys.
NOTE
If new inspection file, only default limit is set.
7. Select Incr.
8. Using Next Limit or Previous Limit keys, highlight the limit set required
that was created in either add limits or edit limits.
SITE NAME
SITE PRIORITY
SITE BOARD TYPE
SITE STENCIL TYPE
SITE ALIGNMENT
SITE LIMIT ID
PASTE SCALING
SITE X COORD
SITE Y COORD
SITE WIDTH
SITE HEIGHT
SCREEN GRAPHIC X
SCREEN GRAPHIC Y
SITE1
EVERY CYCLE
ADVANCED
ADVANCED
X AND Y
DEFAULT
1.00
75.9
111.7
2.00
2.00
0.00
0.00
mm
mm
mm
mm
mm
mm
.. more
Edit Site Parameters
Learn
Screen
Light
Setup
Next Previous Incr. Decr. Exit
Learn
Screen
Light
Setup
Next Previous Incr. Decr. Exit
DEFAULT
COARSE
BGA
QFP
Limit Sets
Use
Limit
Next
Limit
Previous
Limit
Exit
INFINITY
',163(&7,21
',163(&7,216(783
Software Version 7 User Manual 8.27
9. Select Use Limit.
Lighting Setup 1. Select Light Setup.
Figure 8-8 Green Camera Lighting Parameters
2. Using the Next, Previous, Incr. and Decr. keys, adjust the lighting
parameters to a level whereby the stencil and board pads are just whiting out,
without blooming, default level 8 is usually adequate for the majority of
setups.
3. Select Exit.
Site Setup 4. Using one of the controls listed, carry out the following:
a. Mouse - Drag and drop the red Region Of Interest box (ROI) to the desired
position.
b. Touchscreen (if available) - Drag the red ROI box to the desired position.
c. Manual Function Buttons - Next, Previous, Incr. and Decr. keys adjust
the ROI position via the parameters.
5. Select Learn Screen.
The message ‘Stencil Learnt. Use the mouse in the board view to align
the board graphic or edit the parameters’ is displayed in the message
prompt bar.
Use
Limit
Next
Limit
Previous
Limit
Exit
Learn
Screen
Light
Setup
Next Previous Incr. Decr. Exit
8
8
8
8
-1.5
-1.5
3.0
3.0
mm
mm
mm
mm
Inspection Lighting Parameters
SCREEN VERTICAL
SCREEN OBLIQUE
BOARD VERTICAL
BOARD OBLIQUE
WINDOW LEFT
WINDOW TOP
WINDOW WIDTH
WINDOW HEIGHT
Next Previous Incr. Decr. Exit
Next Previous Incr. Decr. Exit
Add
Site
Learn
Screen
Light
Setup
Next Previous Incr. Decr. Exit
INFINIT
Y
',163(&7,21
',163(&7,216(783
8.28 User Manual Software Version 7
If the graphics on the board side requires adjusting, use the Incr. Decr. to
adjust the X and Y offsets to align the overlay onto the pads.
6. Select Learn Board.
The message ‘Board Learnt’ is displayed in the message prompt bar.
7. If ‘...Board Not Learnt’ is displayed, select Adjust Screen and return to
Step 4.
If device is to be learnt select Auto Learn as detailed in the next section.
Image on board does
not coincide with
board pads
BOARD GRAPHIC X
BOARD GRAPHIC Y
0.0
0.0
mm
mm
Learn Site Parameters
Learn
Board
Adjust
Screen
Next Previous Incr. Decr. Exit
Outline of pads are
superimposed on the
board display
Learn
Board
Adjust
Screen
Auto
Learn
Next Previous Incr. Decr. Exit