DEK INFINITY USER MANUAL.pdf.pdf - 第328页

INFINITY &21680$ %/(5(3/ (1,6+0(1 76 352)/2: 9.44 User Manual Software Versi on 7 25. Remove the snap fit lid from a new cassette. Fit a new cassette (1) int o the carrier rece ss (2) and secure into place with the …

100%1 / 356
INFINITY
&21680$%/(5(3/(1,6+0(176
352)/2:
Software Version 7 User Manual 9.43
22.Hinge the clamp brackets (1) outwards. Hinge the carrier and cassette (2)
towards the front of the machine exposing the top of the cassette.
23.Carefully remove the empty cassette (1) from the carrier (2) by lifting the
cassette clear of the retaining pins (3) sited at each end of the carrier unit.
24.Dispose of the empty cassette in accordance with local authority guidelines.
2
1
1
2
3
2
1
3
INFINITY
&21680$%/(5(3/(1,6+0(176
352)/2:
9.44 User Manual Software Version 7
25.Remove the snap fit lid from a new cassette. Fit a new cassette (1) into the
carrier recess (2) and secure into place with the retaining pins (3).
26.Remove the sealing foil from the top of the new cassette.
27.Hinge the clamp brackets (1) inwards to position the cassette onto the
transfer head, secure in place by tightening the thumbscrews (2).
28.Lower the pressure mechanism (3) in place until the latch engages.
29.Close the front printhead cover.
30.Press the System button.
31.Select Setup ProFlow (F4).
3
2
1
3
2
2
3
1
1
Mode
Load
Data
Edit
Data
Setup
ProFlow
Change
Screen
Change
Tooling
Change
Language
Exit
INFINITY
&21680$%/(5(3/(1,6+0(176
352)/2:
Software Version 7 User Manual 9.45
32.Press Prime ProFlow (F6). If it is possible to carry out the prime ProFlow
function the message ‘Performing knead off-image.’ is displayed. If it is
not possible the function is deferred until it is, ie at the start of a print stroke
with a board loaded.
NOTE
If stencil protection is set to On in the current board file, Prime ProFlow is
not possible, priming can be carried out by kneading over-image.
33.Press Exit (F8).
34.Press Exit (F8).
During a Print Run When the ProFlow cassette needs replenishment a warning window is automat-
ically displayed on the monitor. The warning window varies, depending on the
setting of the consumable action option in set preference.
If the set preference is set to warn, continue with Step 1. If the set preference is
set to pause go to Step 6. If the set preference is set to suspend go to Step 11.
1. If the set preference is set to warn, the tricoloured beacon shows amber/green
and the following window is displayed:
2. Select Confirm (F1).
3. Select End Run (F1).
4. Carry out Steps 19-33 of Prior to a Print Run procedure, earlier in this
section.
5. Select Run (F1).
Change
ProFlow
Load
Cassette
Prime
ProFlow
Exit
Change
ProFlow
Load
Cassette
Prime
ProFlow
Exit
Mode
Load
Data
Edit
Data
Setup
Squeegee
Change
Screen
Change
Tooling
Change
Language
Exit
Warning
Print Medium Low. Please replenish.
Confirm
End
Run
Stop
Cycle
Paste
Load
Clean
Screen
Adjust
Knead
Paste
Run Head
Paste
Load
Clean
Screen
Adjust Setup Monitor Maint.