DEK INFINITY USER MANUAL.pdf.pdf - 第160页

INFINITY +267 &2008 1,&$ 7,21 6 +267 &2006 3.10 User Manual Software Versi on 7

100%1 / 356
INFINITY
+267&20081,&$7,216
+267&2006
Software Version 7 User Manual 3.9
4. Select Download, the chosen product data file is transferred from the Host.
5. Select Exit.
Equipment Control
Level
To change the equipment control level proceed as follows:
1. Select Host Comms.
The Host Communications window is displayed as follows:
2. Select the required equipment control level from the three options:
On-Line, Off-Line or Local/Remote.
3. Select Exit.
4. Select Exit.
Download Exit
Term inal
Services
Transfer
To Host
Transfer
To Equip
On-Line Off-Line
Local/
Remote
Exit
Log
On
Host
Comms
Clear
Batch
Batch
Limit
Perform
Display
Event
Display
System
Disable
Exit
Host Communications
Communications Protocol
Communications:
Equipment Control
On-Line Control
GEM
Enabled-Communications
On-Line
Remote
Term inal
Services
Transfer
To Host
Transfer
To Equip
On-Line Off-Line
Local/
Remote
Exit
Term inal
Services
Transfer
To Host
Transfer
To Equip
On-Line Off-Line
Local/
Remote
Exit
Log
On
Host
Comms
Clear
Batch
Batch
Limit
Perform
Display
Event
Display
System
Disable
Exit
INFINITY
+267&20081,&$7,216
+267&2006
3.10 User Manual Software Version 7
INFINITY
(55250(66$*(6
,1752'8&7,21
Software Version 7 User Manual 4.1
CHAPTER 4 ERROR MESSAGES
INTRODUCTION If for any reason the machine does not complete a particular sequence in the time
allowed for in software, an error condition arises. The relevant error message is
displayed on the machine monitor.
Machine Errors are detected by sensors specifically designed for checking
correct machine status (System Power, Pneumatic Power, etc.) or by functions
failing to achieve their correct operation. These latter errors are either detected
by a limit sensor being operated or by setting a time limit for their completion.
The time limits are set so they are 1.5 times the longest possible time taken for
that particular operation, after which, if not completed, an error is reported on
the machine monitor.
When an error occurs the relevant message is displayed on the machine monitor.
The displayed error message is accompanied by information regarding the
possible causes and the corrective action to be taken.
The Tricolour beacon changes to red and records the error in the Event Log file.