DEK INFINITY USER MANUAL.pdf.pdf - 第181页

INFINITY ',$*12 67, &6 352)/2: Soft ware Ver sion 7 User Manual 5.13 Home ProFlow Selecting this diagnostic function dr ives the ProFlow unit up to the home position. If the downstop is in the way a warning is d…

100%1 / 356
INFINITY
',$*1267,&6
352)/2:
5.12 User Manual Software Version 7
PROFLOW Selecting this diagnostics module opens the following window:
The menu bar changes to the following:
Next / Previous keys move the highlight bar up and down the list of selectable
diagnostic functions.
Run Diagnost activates the diagnostic function, as selected by the highlight bar.
Exit returns operation to the module diagnostics page.
Adjust opens the following window:
NOTE
Idle Pressure is only available while a software controlled air regulator is fitted.
The menu bar changes to the following:
Next / Previous keys move the highlight bar up and down the list of diagnostic
parameters.
Incr. / Decr. keys change the value of the selected diagnostic parameter.
Exit returns operation to the ProFlow diagnostics page.
ProFlow Diagnostics
System Pressure
ProFlow Fitted
Paste Cassette Low
Software Pressure Regulator Fitted
11.42Kg
ON
OFF
Home ProFlow
Drive System to Contact Height
Drive System to Print Height
Home Downstop
Drive Downstop to Position
Drive System Using Jog Buttons
Drive Downstop Using Jog Buttons
Toggle Paste Pressure
ON
OFF
Run
Diagnost
Adjust Next Previous Exit
ProFlow Adjust Parameters
PFLOW CONTACT POS.
DOWNSTOP POS.
IDLE PRESSUE
0.0
0.0
0.2
mm
mm
bar
Next Previous Incr. Decr. Exit
INFINITY
',$*1267,&6
352)/2:
Software Version 7 User Manual 5.13
Home ProFlow Selecting this diagnostic function drives the ProFlow unit up to the home
position. If the downstop is in the way a warning is displayed.
Drive System to
Contact Height
Selecting this diagnostic function drives the ProFlow unit onto the screen, (a
slight pressure seal, is made between the ProFlow transfer head and the screen).
There is no pressure applied to the paste cassette.
Drive System to
Print Height
Selecting this diagnostic function drives the ProFlow transfer head down to
printing pressure (as setup in the Edit Data board file). There is no pressure
applied to the paste cassette at this time.
Home Downstop Selecting this diagnostic function drives the downstop to its home position (fully
raised).
Drive Downstop to
Position
Selecting this diagnostic function drives the downstop to the preset downstop
position (offset can be adjusted in the status menu page by selecting Maint. and
selecting Set Prefs menu).
Drive System
Using Jog Buttons
Selecting this diagnostic function enables the ProFlow unit to be moved up or
down by means of the jog buttons.
Drive Downstop
Using Jog Buttons
Selecting this diagnostic function enables the downstop to be moved up or down
by means of the jog buttons.
Toggle Paste
Pressure
Selecting this diagnostic function initiates pressure onto the paste cassette.
Before initiating pressure to the paste cassette, the transfer head must be in
contact with, and have an adequate seal with the screen. A warning is displayed
if toggle paste pressure is selected with the transfer head off the screen.
System Pressure This diagnostic function continuously displays the current pressure in kg,
exerted from the squeegee pressure load cell onto the ProFlow unit.
ProFlow Fitted Indication of electrical connection of ProFlow to the machine software.
Paste Cassette Low ProFlow paste low sensor activated (on), indicating paste low or empty or,
deactivated (off).
Software Pressure
Regulator Fitted
Switched to OFF indicates that the ProFlow unit is fitted with a mechanical
pressure regulator control. Switched to ON indicates that the software address-
able regulator control is activated, ie ProFlow not fitted with mechanical pres-
sure regulator.
INFINITY
',$*1267,&6
648((*((
5.14 User Manual Software Version 7
SQUEEGEE Selecting this diagnostics module opens the following window:
The menu bar changes to the following:
Next / Previous keys move the highlight bar up and down the list of selectable
diagnostic functions.
Run Diagnost activates the diagnostic function, as selected by the highlight bar.
Exit returns operation to the module diagnostics page.
Home Front
Squeegee
Selecting this diagnostic function drives the front squeegee upwards to its home
position, as detected by its home sensor.
Home Rear
Squeegee
Selecting this diagnostic function drives the rear squeegee upwards to its home
position, as detected by its home sensor.
Front Squeegee to
Dwell Height
Selecting this diagnostic function drives the front squeegee to a position clear of
the top of the screen (default is 30mm).
Rear Squeegee to
Dwell Height
Selecting this diagnostic function drives the rear squeegee to a position clear of
the top of the screen (default is 30mm).
Rear Squeegee to
Flood Height
Selecting this diagnostic function drives the rear squeegee to the height set by
the flood reference height parameter.
Drive Front
Squeegee Using
Jog Buttons
Selecting this diagnostic function enables the front squeegee to be driven up and
down using the jog buttons. The right jog button drives the squeegee down and
the left jog button drives it up, stopping immediately the button is released. ‘Use
the Left Jog Button to move the Squeegee upwards, and the Right jog
Button to move it downwards.’ is displayed in the message prompt box.
Drive Rear
Squeegee Using
Jog Buttons
Selecting this diagnostic function enables the rear squeegee to be driven up and
down using the jog buttons. The right jog button drives the squeegee down and
the left jog button drives it up, stopping immediately the button is released. ‘Use
the Left Jog Button to move the Squeegee upwards, and the Right jog
Button to move it downwards.’ is displayed in the prompt box.
Squeegee Diagnostics
Pressure Reading
22.356
Home Front Squeegee
Home Rear Squeegee
Front Squeegee To Dwell Height
Rear Squeegee To Dwell Height
Rear Squeegee To Flood Height
Drive Front Squeegee Using Jog Buttons
Drive Rear Squeegee Using Jog Buttons
Run
Diagnost
Next Previous Exit