2OM-1751-003w_G5S.pdf - 第119页
2OM-1751 1-67 1303-001 6. "Manage" Submenu F2A47 The "Manage" submenu is provided with the following three buttons. When a button is pressed, the corresponding window opens, enabling the operator to s…
2OM-1751
1-661303-001
5. "Prod.Dt." Submenu
F2A46
The "Prod.Dt." submenu is provided with the following three menu items. When
each button is pressed, the corresponding window appears.
Please fully understand the purposes of each data for better performance of the
machine.
Buttons Description
PP.Data
Pattern programs must be created for each PCB to be produced.
The automatic operation of this machine is controlled by these pattern programs.
Reference
Refer to "Pattern Program in Chapter 2" for the details.
Comp Lbry
This library stores data related to picks, recognition, and placement of each
individual component.
Reference
Refer to "Component Library in Chapter 3" or "Component
Library in Volume 6" for the details.
Temp.Chng.Comp Lbry
The corresponding tab window enables the operator to change the component library
temporarily during the automatic operation.
Reference
Refer to "2. Component Library in Chapter 3" or "Component
Library in Volume 6" for the details.
Alt Comp ID List
The corresponding window is used to setup the alternative components in placed of
the current components.
Reference
Refer to "3. Alternative Component List" in Chapter 3 for details.
T2A3
5. "Prod.Dt." Submenu
Graphic
Development
2OM-1751
1-671303-001
6. "Manage" Submenu
F2A47
The "Manage" submenu is provided with the following three buttons.
When a button is pressed, the corresponding window opens, enabling the operator
to select the required data.
Buttons Description
Mng.Dt.
When pressed, the "Management Data" window is displayed and
operated for totaling the management data for the whole system.
Reference
Refer to "2. "Mng.Dt." Window" in Chapter 4 for the details.
Cmt.PP.Mng.Dt
When pressed, the "Crnt.PP.Mng.Dt" window is displayed and operated
for totaling the current pattern program management data for each
pattern program.
Reference
Refer to "3. "
Crnt.PP.Mng.Dt" window"
in Chapter 4 for the
details.
Msg Rate Data
When pressed, the "Msg Rate Data" window is displayed and operation
for displaying the component handling error rate managed for each
feeder or nozzle based on each component handling error rate specied
in the operation parameter setting.
Reference
Refer to "4. "MESSAGE.RATE.DT" Window" in Chapter 4 for the
details.
T2A4
Graphic
Development
6. "Manage" Submenu
2OM-1751
1-681303-001
7. "Recall" Submenu
"Recall" Window F2A48
The "Recall" submenu is provided with the following ve buttons.
When a button is pressed, the corresponding window opens, enabling the operator
to select the required data.
Buttons Description
Device Err
When pressed, the device error history is displayed.
Reference
Refer to "2. "Device Err" Window "in Chapter 5, for the details.
Comp Rcg Err
When pressed, the component recognition error history is displayed.
Reference
Refer to "3. "Comp Rcg Err "Window" in Chapter 5, for the
details.
Comp Err(Sens)
When pressed, the detected component posture error history is
displayed.
Reference
Refer to "4. "Comp Err(Sens)" Window" in Chapter 5, for the
details.
Mach Info
When pressed, the machine information history is displayed.
Reference
Refer to "5. "Mach Info" Window" in Chapter 5, for the details.
Disp. Rcg img dt
When pressed, the "Disp. Rcg Img Dt" window appears.
Reference
Refer to "6. "Display of Recognized Image" Window" in Chapter 5,
for the details.
T2A5
Graphic
Development
7. "Recall" Submenu