2OM-1751-003w_G5S.pdf - 第339页
2OM-1751 6-67 [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] F2F59 [8] [ ] Button This checks the created library data. [9] [ ] Button When this button is pressed, the previous library data item is back. Note The compon…
2OM-1751
6-66
[6] [ ] Button
When this button is pressed the graphic image movement speed is changed.
[7] This shows the coordinate system of the component library.
When you click the coordinate graphic and drag the arm portion of the
coordinates, the whole graphic moves.
Dragging the end of the arrow mark of the coordinates makes the whole
graphic rotate.
Dragging the line segment of the
arrow extended from the coordinate
point moves the whole graphic.
Dragging the arrowhead rotates
the whole graphic.
F2F58
Notice
(a) The coordinate system of the component library is described
as "Upper +" and "Right +" in the instruction manuals, etc.
However, as the image of a component is captured from under
the component, it should be noted that the direction of the X
axis is reversed (Left +).
(b) Note that dragging a lead, an electrode, etc., other than a
graphic coordinate segment changes the component library
data.
1303-001
7.3 "COMP RCG" Test Window
2OM-1751
6-67
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
F2F59
[8] [ ] Button
This checks the created library data.
[9] [
] Button
When this button is pressed, the previous library data item is back.
Note
The component graphic image position is not returned.
[10] [ ] Button
When this button is pressed, the previous library data item is returned.
Note
The component graphic image position is not returned.
[11] [ ] Button
This opens a data round-up dialog, making it possible to round up the data
based on the specied unit of measurement.
1303-001
7.3 "COMP RCG" Test Window
2OM-1751
6-68
[12] [ ] Button
This species the missing leads and balls.
When you click the lead group or the ball group to be selected as an object
group for missing lead or ball detection, the color of the graphic squares
changes from "Green" to "Yellow", indicating that this button has become
valid.
After clicking the button, enclose the leaded portion to be specied as a
missing area with the track ball as shown below.
Note
When "IC (Simple)", "Connector (Simple)", or "Other Leaded (Simple)"
is selected in the "Component Shape" text box, one place can be specied
for one group. In the case of "IC (Complex)", "Connector (Complex)", or
"Other Leaded (Complex)", up to three places can be specied. In the case
of "BGA/CSP", up to forty places can be specied.
F2F60
[13] [ ] Button
This makes it possible to insert leads and balls into the lead and ball missing
areas.
The condition that validates the button is the same as [12].
For example, this button can be used effectively for such a BGA as shown
below.
→ → →
Specify the missing
area with the
[Missing] button.
Insert balls into
the missing area
with the [Insert]
button.
Specify the missing
area again with the
[Missing] button.
Insert balls again
into the missing
area with the
[Insert] button.
F2F61
1303-001
7.3 "COMP RCG" Test Window