2OM-1751-003w_G5S.pdf - 第33页

Safety Precautions Safe-24 1OM-1751 1305-002 5. Alert Labels Alert Labels and Description No. Alert Labels and Description (1) Description  Strong permanent magnets are used in the moving mechanisms of the X/Y beam. Tho…

100%1 / 380
Safety Precautions
Safe-23
1OM-1751
5. Alert Labels
1305-002
00-0293-
(14)
F1X10
Safety Precautions
Safe-24
1OM-1751
1305-002
5. Alert Labels
Alert Labels and Description
No. Alert Labels and Description
(1)
Description
Strong permanent magnets are used in the moving mechanisms of the X/Y beam.
Those who wear implanted pacemakers should not work inside the machine.
The pacemaker may be affected by magnetism, causing a serious accident.
(2)
A pacemaker wearer is not allowed
to handle the feeders.
The pacemaker might be a ffected by the
electromagnetism and the death of the pacemaker
wearer might be caused.
10-0338-
Description
Permanent magnets are used in the tape feeding and cover tape take-up sections of
the tape feeder.
Do not allow any person who wears an implanted pacemaker to handle the tape
feeders. Otherwise, the pacemaker may be affected by magnetism, causing a serious
accident.
(3)
Description
When maintenance or checks are performed, make sure to turn off the power to the
machine or air source. When maintenance or checks are performed with the power
or air turned ON, an electric shock or injury might be caused.
Safety Precautions
Safe-25
1OM-1751
1303-001
5. Alert Labels
No. Alert Labels and Description
(4)
Description
Only well-trained service personnel shall replace the cutter blades. Otherwise, a
hand injury, etc., will result.
(5)
Description
This label indicates that high voltage is applied to the area. Residual voltages may
remain behind for a few minutes in the internal devices of the machine after power
interception.
Before performing maintenance work, wait until the charge lamps of the DC power
supply and the servo amplier go "OFF" in 10 minutes or more after the power
breaker is set to "OFF".
(6)
Description
Before connecting to the breaker's primary power leading-in section, connect the
grounding cable (PE).
Imperfect grounding will cause an electric shock.