2OM-1751-003w_G5S.pdf - 第284页
2OM-1751 6-12 1303-001 • For Support Pin Automatic Change Procedure (1) Press the [Setup] button on the submenu bar to display the "SPR T -PINS" window . F2F12 (2) Press the [PCB Support Pins Exchange Pos. Move…
2OM-1751
6-111303-001
(5) Close the transparent cover and press the cover lock switch.
(6) Press the [Product Opn Target Pos Movement] button.
In 10 seconds, press the [START] button on the operation panel.
(The conveyor width is changed appropriate for the selected pattern
program.)
(7) Press the pertinent cover lock switch. The lamp of the switch extinguishes.
(The transparent cover (door type) is unlocked. )
(8) Open the transparent cover (door type).
(9) Insert the PCB support pins vertically to the holes on the backup table.
(Be sure to set up the PCB support pins such that they are dispersed to
support the object PCB equally.)
Notice
Do not put your hand or any heavy object on the backup table while
working with the backup table. Otherwise, the backup table may become
deformed due to an excessive load.
(10) Conrm that a PCB support pin, etc., is not left behind on the backup table.
(Conrm that no component or dust, etc., has fallen into the holes on the
backup table.)
(11) Close the transparent cover (door type).
(12) Press the cover lock switch. The lamp of the switch illuminates.
(The transparent cover (door type) is locked.)
(13) Press the [Release] button in the "PCB Locate" group box.
In 10 seconds, press the [START] button on the operation panel.
(The backup table moves down.)
POWER ON
STOP
PNL CHANGE
START
F2F11
4.1 Collection of PCB Support Pins and Setup Operation of Conveyor Width
2OM-1751
6-121303-001
•
For Support Pin Automatic Change
Procedure
(1) Press the [Setup] button on the submenu bar to display the "SPRT-PINS"
window.
F2F12
(2) Press the [PCB Support Pins Exchange Pos. Movement] button.
After that, press the [START] button on the operation panel in 10 sec.
(The machine retracts the head and maximizes the conveyor width.)
(3) Press the [PCB Support Pins Rem./Atch. Work] button and within 10
seconds, press the [START] button on the operation panel.
(The support pin attachment or removal will be performed automatically).
Note
When the support pins are to be changed automatically, prepare the nozzle
(PK01) in the nozzle stocker.)
(4) Press the [Product Opn Target pos Movement] button and within 10 seconds,
press the [START] button on the operation panel.
(The conveyor width will be changed according to the selected pattern
program).
4.1 Collection of PCB Support Pins and Setup Operation of Conveyor Width
2OM-1751
6-131303-001
4.1.1 Notes on Attachment / Detachment of PCB Support Pins
Notice
Be sure to insert the PCB support pins at right angles.
•
When a PCB support pin is inserted at the bottom side of the chute, it
may collide with the backup table while the backup table is moving up.
•
If the pins are inserted improperly, the machine will break down.
Chute
PCB
Previously Placed
Component
Chute
PCB Support Pin
Backup Table
Collision!
Backup Table Up Movement
Improper Pin Insertion
F2F13
Collision!
Foreign Substance on Backup Table
Foreign Substance such
as a component trapped in the hole
F2F14
Notice
(a) When a component is trapped or dust has accumulated on the
backup table, the PCB support pins cannot be set correctly.
In this case, remove the component or the dust with a vacuum
cleaner, etc. (Air Blowing Prohibited).
(b) Do not put your hand or any heavy object on the backup table while
working with the backup table. Otherwise, the backup table may
become deformed due to an excessive load.
NOTICE
When some components are previously placed on the back
of the PCB, the PCB support pins must be inserted such
that they do not touch any component.
4.1 Collection of PCB Support Pins and Setup Operation of Conveyor Width