2OM-1751-003w_G5S.pdf - 第16页
Safety Precautions Safe-7 1OM-1751 1303-001 3. Common Precautionary Items Notes on Installation, T ransfer and Maintenance Do not install or transfer the machine on the customer side after shipment. T o ensure perfect…
Safety Precautions
Safe-6
1OM-1751
1303-001
3. Common Precautionary Items
Conrm that the "LOCK" lamp (green) is ON on the operation panel before
operating the machine.
If the "LOCK" lamp is not turned ON, the machine can be operated at any time
from both front and rear sides, endangering the operators around the machine.
When there is a problem with the machine, locate the cause and assess the
condition. Set the power breaker to "OFF".
After the problem has been rectied completely, reset the machine to its normal
condition.
When the green lamp of the light tower is ON or ickering (ON and OFF), it indicates
that the static machine is in the "Automatic" mode (standby mode).
In case of a disaster of any kind, earthquake, storm, ood, re, or lightning, immediately
stop the machine and turn off the power supply.
When the machine stops due to a component pickup error, be sure to remove the
mispicked component from the feeder and start the automatic operation.
Do not use any unspecied feeders.
Safety Precautions
Safe-7
1OM-1751
1303-001
3. Common Precautionary Items
Notes on Installation, Transfer and Maintenance
Do not install or transfer the machine on the customer side after shipment.
To ensure perfect operation of the machine, including safety and accuracy, only the
marketing department or sales agency of Yamaha Motor Co., Ltd. will install the
machine or transfer it to another place.
Only the maintenance work on items described in this manual should be performed by
the customer. Please read the instruction manual carefully before maintenance work.
Do not perform any maintenance work on items that are not described in this manual.
Otherwise, not only breakdown of the machine but also personal injury may result.
When an alert label has deteriorated and become illegible, contact the marketing
department or sales agency of Yamaha Motor Co., Ltd..
Only a well-trained service person should perform maintenance work carefully
through for the machine in compliance with the instructions.
Before the maintenance work, be sure to turn off the power breaker and lock
them with padlocks.
Designate a person who can have charge of the padlock key.
If the provided padlock is lost or damaged, purchase its substitute.
Even when the power breaker is set to "OFF", the primary line is powered,
making it possible to cause an electric shock.
Be sure to completely stop the power supply to the machine before maintenance work.
Residual voltages may remain behind for a few minutes in the internal devices
of the machine after power interception.
Before performing maintenance work, wait until the charge lamps of the DC power
supply and the servo amplier go "OFF" in 10 minutes or more after the power breaker
is set to "OFF".
Do not mount on the machine’s top surface. Otherwise, you might fall from it.
When you access inside the machine, work with care for things overhead.
Safety Precautions
Safe-8
1OM-1751
4. Alert Indications in Instruction Manual
The following summarizes the precautionary items and the location of alert indications in
the instruction manual.
Alert Indications described as "
DANGER
"
Alert Description Pages
There are strong motorized and high-voltage areas inside the
machine. Special caution should be paid not to touch them.
Doing otherwise will cause personal injury (serious accident).
•
Only qualied maintenance personnel should detach the
covers.
•
The machine should be operated with the covers being
attached.
•
If a cover is detached, be sure to reattach it.
•
Be sure to close the covers (door type) before operating the
machine.
•
Do not disengage the interlock mechanism of the covers (door
type).
"2.2.3" in
"Chapter 1 (Vo. 1)"
"1.1.3" in
"Chapter 3 (Vol. 1)"
1305-002
4. Alert Indications in Instruction Manual