2OM-1751-003w_G5S.pdf - 第336页

2OM-1751 6-64 1303-001 7.3.6 "Execution T each" Window When the [Recog] or [Teach] is pressed in the component library teaching operation window, the following window appears. In the case that the "Library…

100%1 / 380
2OM-1751
6-63
(12) Execute the hysteresis test.
Reference
Refer to "7.3.4.1 Hysteresis Test
"
in chapter 6, Vol.2, in the Instruction
Manual for the Main Machine for the details
(13) Press the [Dscd] or [Collect.] button and within 10 seconds, press the [START]
button on the operation panel.
Discard
: When selected, the discard operation is performed based on
the component discharge position data in the test ID.
Collection
: When selected, the head is moved to the lane No. specied
using the "Coll. Pos" button and the test component is
collected manually.
(14) Press the [ZERO] button and within 10 seconds, press the [START] button
on the operation panel.
(The XT beam will be returned to the home position and the test will be
ended).
1303-001
7.3 "COMP RCG" Test Window
2OM-1751
6-641303-001
7.3.6 "Execution Teach" Window
When the [Recog] or [Teach] is pressed in the component library teaching
operation window, the following window appears.
In the case that the "Library Teaching New Creation" function is enabled, the new
teaching wizard is started up. Proceed the operation according to the instructions
in the window.
F2F56
7.3 "COMP RCG" Test Window
2OM-1751
6-65
7.3.6.1 Explanation of "Component Library Teaching" Window
[1]
[2]
[3]
[4]
[5]
[6]
[7]
F2F57
[1] [ ] Button
Press this button to exit from the component library teaching session.
To save the edited data, press the [Yes] button. Pressing the [No] button
aborts the data.
[2] [
] Button
This saves the edited data.
[3] [
] Button
This opens an image capture dialog box, making it possible to capture an
image according to the specied condition.
At the time of "New Teaching" or "Modication Teaching", the captured
image is used for the teaching operations.
Note
The lighting pattern specied in this dialog box is not reected on the
library data.
[4] [ ] Button
This makes it possible to move the displayed image.
[5] [
] Button
When one of these arrow buttons is selected, the selected graphic moves or
rotates slightly in the selected direction.
When the coordinate system, the mold size, or the outward length is selected,
the whole graphic moves or rotates slightly in the selected direction.
1303-001
7.3 "COMP RCG" Test Window