CP45FVNEO Maintenance Reference (Eng, Ver3).pdf - 第32页
Samsung Component Placer CP45NEO Series Maintenance Refer ence 1.3. T ools for Maintenance 1.3.1. Cleaning Kit (Part number: J81001 18A) A cleaning kit that is needed to perform main tenance of this machine is supplied t…
Preventive Maintenance
1-3
Figure 1-1. The solution for switching the power terminal connection of a transformer
<Example>
Input power
Single phase AC
220V
Power Consumption: 6.3 KVA (Maximum)
Frequency: 50 / 60 Hz
Danger
If unspecified voltage is used or power input is changed
improperly, fire could occur and a death from electric shock
could occur.
Change of power input must be done by a trained repair and
maintenance operator or our authorized C/S personnel.
1.2.3. Environmental conditions
During operation
Temperature: +10 ℃ ~ +35 ℃
Humidity
Less than 50% RH (35 ℃)
Less than 90% RH (20 ℃)
During shipment or storage (in states other than during operation)
Temperature: -10 ℃ ~ +60 ℃
Humidity: 20% RH ~ 90% RH (non-condensation state)
Samsung Component Placer CP45NEO Series Maintenance Reference
1.3. Tools for Maintenance
1.3.1. Cleaning Kit (Part number: J8100118A)
A cleaning kit that is needed to perform maintenance of this machine is supplied together
with the machine. The following provides a description of the items comprising the
cleaning kit and their use.
Brush Air Ejector
Small Brush
Air Ejector
Used to blow away any dirt on the surface of the camera lens.
Brush
Used to remove any chips or foreign matter on the feeder base surface.
Small Brush
Used to remove dust on the mirror surface.
1-4
Preventive Maintenance
1-5
Swab
Alcohol Clean Cloth Embossed glove
Swab / alcohol
Used to clean the fly camera lens surface.
Clean Cloth
Used to clean any foreign matter on the mirror or lens.
Embossed glove
Used to clean the camera or mirror.
1.3.2. Other Tools Provided
Driver Monkey spanner
T wrench
Spanner
(7mm)
Lubricant for nozzle
(Nozzle Spring)
Spray for removing
foreign matter fro
m
nozzle