CP45FVNEO Maintenance Reference (Eng, Ver3).pdf - 第95页

Lubricant Method 4-7  If the working space is insufficient, move the head assembly manually to the front side and place it at the center of the X-axis.  Remove dust and foreign matter from the LM guid e rail and ball s…

Samsung Component Placer CP45NEO Series Maintenance Guide

Figure 4-2. X-axis L/M Guide Rail & Block

Solution

 Operate the teaching box to move the head assembly to the front side as far as

possible and click the motor free button.

Warning

After clicking the “Motor Free” button on the teaching box,

click the “Stop” button on the front operation panel.

Conduct inspection while the motor power supply is turned

off.

4-6

Lubricant Method

4-7

 If the working space is insufficient, move the head assembly manually to the front

side and place it at the center of the X-axis.

 Remove dust and foreign matter from the LM guide rail and ball screw using the

clean cloth in the clean kit supplied by us.

 Apply grease thinly on the LM Guide Rail using the one way brush.

 Apply grease thinly on the Ball Screw Rail using the one way brush.

Caution

The designated grease must be applied using the

designated lubricator in the designated manner. Other

lubricating methods are unacceptable.

Samsung Component Placer CP45NEO Series Maintenance Guide

4.2.2.2. Y-axis L/M Guide Rail, Ball Screw

Inspection

 Check the L/M Guide Rail and the Ball Screw for discoloration or dust.

 Check the lubricants on the L/M Guide Rail and the Ball Screw. Insufficient

lubricants on the L/M Guide Rail and the Ball Screw could cause unusual noise

during operation of the machine.

Figure 4-3. Y-axis L/M Guide

Solution

 Operate the teaching box to move the head assembly to the front side as far as

possible and click the motor free button.

4-8