CP45FVNEO Maintenance Reference (Eng, Ver3).pdf - 第73页

W eekly Inspection 3-23 Figur e 3-5. Flying vision <Normal Flying V ision Image> <Abnormal Flying V ision Image> Solution Flying V ision Lightning Flying V ision Lens  Operate the teaching box to move the he…

Samsung Component Placer CP45NEO Series Maintenance Reference

Warning

After clicking the “Motor Free” button on the teaching box,

click the “Stop” and “Reset” buttons on the front operation

panel. Conduct inspection while the motor power supply is

turned off.

 Open the window and check if the pressure reading on the pressure gauge of the air

module at the head assembly is abnormal (less than 0.1Mpa).

 Open the window and check visually if there is any twist in the coil tube. Straighten

any part that is twisted.

 Check by hand whether there is any abnormal air leakage by the wear of the coil tube.

If there is any abnormal air leakage, replace with a new coil tube.

3.2.1.2. Blow Quantity Inspection

Inspection

In case the reading of pressure gauge on the head air module is below 0.1Mpa, there may

be problems in the placement of parts.

Solution

In case the volume of blow is abnormal, please adjust in contact with our C/S company

(STS) or local agent.

Head Air Module

Pressure Gage

3.2.1.3. Flying Vision

Inspection

If there is any contamination on the surface of the Flying Vision Lens and Flying Vision

Lightning, the vision might not recognize shapes properly. Check the Flying Vision Lens

and Flying Vision Lightning for any dust or contamination frequently.

3-22

Weekly Inspection

3-23

Figure 3-5. Flying vision

Solution

Flying Vision Lightning

Flying Vision Lens

 Operate the teaching box to move the head assembly to the front side as far as

possible and click the motor free button.