CP45FVNEO Maintenance Reference (Eng, Ver3).pdf - 第35页

Daily Inspection Chapter 2 . Daily Inspection 2-1 2.1. Nozzle Inspection  Check the nozzle to see if an excessive wear occurs or if the tip of the nozzle has been altered due to impact. In addition, check to see if any …

Samsung Component Placer CP45NEO Series Maintenance Reference

Spanner (46mm) Precision screw driver set

 7mm Spanner: Material number J1700011

 T: Material number J9099034A

 Lubricant for nozzle: Material number J8001073A

 Spray: Material number J8001072A

 Driver: Material number J8001065A

 Monkey spanner: Material number J8001066A

 46mm Spanner: Material number J1700028

 Precision screw driver set: Material number J1700015

1-6

Daily Inspection

Chapter 2 . Daily Inspection

2-1

2.1. Nozzle

Inspection

 Check the nozzle to see if an excessive wear occurs or if the tip of the nozzle has

been altered due to impact. In addition, check to see if any contamination, such as

solder paste is clogging the nozzle.

 Touch nozzle with a finger to check if the nozzle spring work well.

Solution

Clean the nozzle with cleaning liquid in case of contamination, or replace the nozzle if an

excessive wear was detected.

 Execute the ANC dialog box and click the <Put All Nozzle> button to keep all

nozzles that are mounted on the heads in the ANC.

 Operate the teaching box to move the Front X Frame Assembly to the rear side as far

as possible so that front and rear head assemblies do not interfere with each other.

Samsung Component Placer CP45NEO Series Maintenance Reference

 Open the ANC shutter.

 Press “Motor Free” in the teaching box to turn off the power supply to the motor.

2-2