CP45FVNEO Maintenance Reference (Eng, Ver3).pdf - 第56页

Samsung Component Placer CP45NEO Series Maintenance Refer ence Main switch turn-of f direction ( counterclockwise)  Block the main pressurized air at the ai r panel on the rear of the machine. Caution Shock caused by pr…

Weekly Inspection

3-5

 Operate the teaching box to move the Head Assembly to the front side as far as

possible so that front and rear head assemblies do not interfere with each other.

Warning

After clicking the “Motor Free” button on the teaching box,

click the “Stop” and “Reset” buttons on the front operation

panel. Conduct inspection while the motor power supply is

turned off.

 If the working space is insufficient, move the head assembly manually to the front

side

 After terminating the MMI and computer, Turn off the main switch on the front

side of the machine.

Samsung Component Placer CP45NEO Series Maintenance Reference

Main switch turn-of

direction

(

counterclockwise)

 Block the main pressurized air at the air panel on the rear of the machine.

Caution

Shock caused by pressurization while blocking the

pressurized air may be caused. Please handle with care.

 Remove the top cover of the head assembly with a “+” shaped screwdriver.

 After removing the pressure gauge on the head assembly air module by turning the

10mm spanner counterclockwise, assemble the elbow fitting by turning the 10mm

3-6

Weekly Inspection

3-7

spanner clockwise, and supply air pressure through the connection hose.

 Lay a clean cloth at the bottom of the nozzle holder of head 01 and blow out

repeatedly by pressing the manual switch of So1 ten times.

 Blow out head 02 to head 06 in the same way.

 According to the state of the impurities collected on the cloth, remove the vacuum

filter and clean or replace it every two months.