CP45FVNEO Maintenance Reference (Eng, Ver3).pdf - 第41页
Daily Inspection 2-7 Caution When replacing the nozzle hol der tube, if the pneumatic air line is not shut off, it may affect the head function. Replace the nozzle holder tube once the pneumatic air line has been shut of…
Samsung Component Placer CP45NEO Series Maintenance Reference
Operate the teaching box to move the Front X Frame Assembly to the rear side as far
as possible so that front and rear head assemblies do not interfere with each other.
Warning
After clicking the “Motor Free” button on the teaching box,
click the “Stop” and “Reset” buttons on the front operation
panel. Conduct inspection while the motor power supply is
turned off.
Open the window and lower the Z-axis manually to the position where the nozzle
holder of head 1 is visible by pressing the upper surface of the spindle by hand.
Nozzle Holde
r
Check if the nozzle holder tube is not too loose or that any cracks exist by touching it
by hand. In case a defect is found, replace it.
2-6
Daily Inspection
2-7
Caution
When replacing the nozzle holder tube, if the pneumatic
air line is not shut off, it may affect the head function.
Replace the nozzle holder tube once the pneumatic air
line has been shut off.
Check head 2 to head 6 in the same way.
Samsung Component Placer CP45NEO Series Maintenance Reference
2.3. Flying Vision Mirror
Inspection
If there is any contamination on the top of the mirror, the vision might not recognize
shapes properly. Check the top of the mirror for any dust or contamination frequently.
<Normal Flying Vision Image> < Contaminated Flying Vision Mirror Image>
Solution
Move the ‘X Frame Ass’y’ all the way to the front by operating the teaching box, and
put the machine in a motor-free state by pressing the motor-free button of the
teaching box.
2-8