CP45FVNEO Maintenance Reference (Eng, Ver3).pdf - 第67页

W eekly Inspection 3-17 Wa r n i n g Do not insert any part of your body into the machine during I/O testing. Otherwise, serious inj ury may result.  If any problems still occur , contact our designated C/S company (STS…

Samsung Component Placer CP45NEO Series Maintenance Reference

Sensor Window

Sensitivity Control Screw

Red LED

Green LED

Lightness/Darkness Adjusting Screw

 If any problems still occur, contact our designated C/S company (STS) and local

agent.

3.1.6. ANC Open/Close Sensor

Inspection

To determine the accurateness of the open/close action of the ANC shutter, check the

sensor operation through the MMI monitor.

Solution

ANC Shutte

ANC Open/Close

Sensor

 After selecting the Diagnosis from the main menu tool bar in the MMI screen, select

the I/O command from the sub menu tool bar to check the sensor operation.

3-16

Weekly Inspection

3-17

Warning

Do not insert any part of your body into the machine during

I/O testing. Otherwise, serious injury may result.

 If any problems still occur, contact our designated C/S company (STS) and local

agent.

3.1.7. Feeder Unlock Sensor

점검

Feeder unlock sensors are installed at the front and rear of this machine. The system

comes into the emergency stop status if the feeder is not installed correctly at the feeder

base. In this case, verify that the feeder is installed properly.

Front Feeder Unlock Sensor (Ligh

receiving section)

Front Feeder Unlock Sensor (Ligh

emitting section)

Samsung Component Placer CP45NEO Series Maintenance Reference

Rear Feeder Unlock Sensor (Ligh

emitting section)

Rear Feeder Unlock Sensor (Ligh

receiving section)

Caution

If the feeder loose sensor is cancelled arbitrarily, the head

and the feeder might collide as a loose feeder cannot be

sensed.

Do not cancel the feeder loose sensor arbitrarily.