CP45FVNEO Maintenance Reference (Eng, Ver3).pdf - 第63页

W eekly Inspection 3-13 Solution (+)Limit Sensor Home Sensor (-)Limit Senso r  After selecting the Diagnosis from the main menu tool bar in the MMI screen, select the I/O command from the sub menu tool bar to check the …

Samsung Component Placer CP45NEO Series Maintenance Reference

Solution

Pulley

Bel

 If the tension of the belt is adjusted with the screw for belt tension adjustment, the

motor might be affected. When you need to adjust the tension, please contact our

local agent immediately for A/S.

Caution

Each belt of the conveyor system has its own proper

tension value. When the user adjusts the tension at his/her

discretion, a problem may occur. The tension must be

adjusted after contacting our C/S company (STS) or local

agent.

3.1.5.3. Conveyor Width Adjustment (+)(-)Limit Sensor, Home Sensor

Inspection

 Check the operating state of the sensors through the MMI monitor.

3-12

Weekly Inspection

3-13

Solution

(+)Limit Sensor

Home Sensor

(-)Limit Senso

 After selecting the Diagnosis from the main menu tool bar in the MMI screen, select

the I/O command from the sub menu tool bar to check the sensor operation.

Warning

Do not insert any part of your body into the machine during

I/O testing. Otherwise, serious injury may result.

 If any problems still occur, contact our designated C/S company (STS) and local

agent.

Samsung Component Placer CP45NEO Series Maintenance Reference

3.1.5.4. PCB Detect Sensor

Inspection

 Check to see if the sensor window has been contaminated.

 Check the sensor's performance to see whether it is functioning or not.

 Check the sensor operation through the MMI screen.

Figure 3-4. PCB Detect Sensor

Solution

Wait Sensor

Quick load sensor

Placement Sensor

Output Sensor

Input Sensor

 Operate the teaching box to move the head assembly to the rear side as far as possible.

3-14