YRM20_Mainte_E.pdf - 第4页
1. CE marking i Safety instructions 1. CE marking This equipment conforms to the EU Machinery Directive 2006/42/EC (description A1 below) and EMC Directive 2014/30/EU (description A2 below). However , this equipment does…
w
Be sure to read safety instructions before using YAMAHA sprinter or related products.
SFSMT-EN-213-0110
Safety instructions
Contents
1. CE marking i
2. Warning labels ii
2.1 Warning label format and mark description ii
2.1.1 Warning label format ii
2.1.2 Mark description iii
3. Label positions iv
4. Safety x
4.1 To ensure safety x
4.1.1 Defining safety x
4.1.2 Causes of injuries and accidents x
4.2 Using safety gear xi
4.3 Restrictions on machine use xi
4.3.1 Defining the operator and service personnel xi
4.3.2 Restricting machine operation with passwords xi
4.3.3 Lock out the main switch and the air supply/exhaust switch xii
4.4 Cautions during machine operation xiii
4.5 Cautions during power outage xiii
4.6 Cautions regarding ferromagnetic fields xiii
4.7 Handling the internal tape cutter xiii
4.8 Keeping hands away from moving parts xiv
4.9 Handling solvents (including solder, adhesive, and flux) xvi
4.10 Handling the laser xvi
4.11 Handling grease and oil xvii
4.12 Handling batteries xvii
4.13 Handling heavy objects xviii
5. Safety message in this manual xix
1. CE marking
i
Safety instructions
1. CE marking
This equipment conforms to the EU Machinery Directive 2006/42/EC (description A1 below) and EMC
Directive 2014/30/EU (description A2 below).
However, this equipment does not bear CE marking if a custom order item was installed.
A1.
Cautions regarding the official language of EU countries and the language used in operation manuals,
CE declarations, operation screen characters, and warning labels when this equipment is installed in an
EU country.
• All materials except warning labels are written in English only.
n
NOTE
Warning labels only have pictograms or else include warning messages in English, Chinese, Korean and Japanese
languages.
A2.
EMC description
• Electromagnetic immunity (Immunity)
Complies with test standards as specified by EN 61000-6-2.
• Electromagnetic emissions (Emission)
Complies with test standards for ISM category: Group 1, Class A, as specified by EN 55011.
n
NOTE
Class A equipment is intended for use in industrial environments. If used in other environments, ensuring electromagnetic
compatibility (EMC) might be difficult. Refer to EN 55011 standards for detailed information.
2. Warning labels
ii
Safety instructions
2. Warning labels
Warning labels are attached to the machine body and peripheral equipment to use YAMAHA
machines safely and correctly. Check that the information on each warning label is clearly legible
and comply with the instructions.
2.1 Warning label format and mark description
2.1.1 Warning label format
A warning label indicates the degree of hazard by means of a signal word and the color of the signal word
panel as shown below. A mark and a pictogram are also used to emphasize the message.
Labels attached to the outside of machines are basically in 4 languages (English, Chinese, Korean, and
Japanese) while labels attached to the inside of the machines are only a pictogram.
Warning label format
Warning message and mark (pictogram) example
Signal word
Safety alert symbol
Signal word panel
Message
Mark and pictogram
Danger : Red
Warning : Orange
Caution : Yellow
93001-YRM-00