YRM20_Mainte_E.pdf - 第55页
Before maintenance work 2-4 Chapter 2 Daily maintenance items █ Attaching upper cover 1. Open upper cover end plate manually and hold position of upper cover guide section and end plate as illustrated below (angle 30 deg…
Before maintenance work
2-3
Chapter 2 Daily maintenance items
Attaching/Detaching upper cover
Upper cover is detached upon setting-up machine or maintenance work.
The following describes the procedure of attaching/detaching upper cover.
█
Detaching upper cover
1. Open the machine safety cover.
2. Pull frontward the cover locks located at both sides of upper cover.
3. Open the upper cover 30 degrees upward by hand.
4. Pull out front-and-upward while supporting the upper cover with both hands.
Detaching upper cover
Pull out front-and-upward
Approx. 30 deg.
Upper cover
Cover lock
Cover lock
53208-KMX-00
Before maintenance work
2-4
Chapter 2 Daily maintenance items
█
Attaching upper cover
1. Open upper cover end plate manually and hold position of upper cover guide section and end plate
as illustrated below (angle 30 degrees).
2. Insert upper cover into machine at an angle of 30 degrees. At this time, make far end pins and
second far end pins, located at both sides of upper cover, fit into their guides.
3. Close upper cover and confirm the cover locks at both sides click.
Approx. 30 degs.
Attaching upper cover
Approx. 30 degs.
■ Side view
Upper cover guide section
CLICK !
CLICK !
Second far end pin (left)
Far end pin (right)
Second far end pin (right)
Far end pin (left)
Upper cover end plate
53209-KMX-00
Before maintenance work
2-5
Chapter 2 Daily maintenance items
█
Temporary placing of upper cover and precautions
The upper cover can be placed temporarily upon handles of feeder exchange carriage.
Also, a cover identification label attached to upper cover carries machine serial number and number of
carriage set position.
The upper cover is not compatible for other carriage set position or other machine, as the guide position
is adjusted for the correspond machine upon assembling and then the carriage is shipped. Use with the
machine/carriage set position written on cover identification label.
Temporary placing of upper cover
■ Cover identification label
53210-KMX-00