OM-1461-001_w.pdf - 第27页

24 0712-001 [3] "Of fset" Display The offset value (pulse value (mm)) for the selected nozzle stocker is displayed. Master Offset : It shows the deviation from the nozzle stocker designed position (machine coor…

230712-001

8.3 Nozzle Stocker Offset

This procedure teaches the offset to secure the nozzle stocker position

(machine coordinate reference). The inclination in direction X from the

recognition mark for the recognized nozzle stocker section, is calculated

andthevaluesarereectedautomaticallyonthenozzlestockeroffsetin

directions X and Y.

(1) When the [OTHERS] button is pressed on the "TEACHING"

submenu bar, the menu bar for the other teaching functions pops

up.

(2) Press the [NOZ STK OFFSET] button on the pop-up menu bar.

[5]

[1]

[2]

[3]

[4]

Fig.7-4 "NOZZLE STOCKER OFFSET" Window

[1] Select Head Button

The button images showing the head positions are displayed.

Using these images, the PEC recognition camera to be used in the

teaching, is selected.

[2] Nozzle Stocker Select Button

[NST-1], [NST-2] Button

Pressing the [NST-1] or [NST-2] selects the nozzle stocker for which

the offset is displayed.

240712-001

[3] "Offset" Display

The offset value (pulse value (mm)) for the selected nozzle stocker is

displayed.

Master Offset :

It shows the deviation from the nozzle stocker designed position

(machine coordinate reference).

The recognition mark (inside) on the nozzle stocker section

isrecognizedandthevaluesarereectedautomaticallyinthe

values in X and Y.

Stocker (1 to 9) :

This section shows the data for each stocker to correct the

deviation from the nozzle stocker designed position.

The recognition mark on the nozzle stocker section is recognized

and the inclination in direction X is calculated.

ThentheresultsarereectedautomaticallyonthevaluesinX

and Y of the nozzle stocker position.

Cmt

: Offset values before teaching

Adj

: Offset values obtained as the result of teaching

[4] Nozzle Stocker Selection Button

[All Noz Stocker] Button

Theteachingresultsarereectedonallthenozzlestockers.

[Desig Noz Stocker] Button

Theteachingresultsarereectedonthedesignatednozzle

stocker.

[NST-1], [NST-2] Button

Pressing the [NST-1] or [NST-2] selects the nozzle stocker to be

taught.

8.3 Nozzle Stocker Offset

[5] Operation Button

[Teach Start] Button

When this button is pressed, the teaching is performed for the

selected nozzle stocker and the results are displayed in [3] on the

right section of the window.

If any mark recognition error occurs, perform the following

manual alignment.

[Mnl Align Mark 2] Button

When the manual alignment teaching is performed, the "Manual

Alignment Operation Guide" window is displayed to perform the

jig mark (left) recognition on the nozzle stocker jig.

[Mnl Align Mark 1] Button

When the manual alignment teaching is performed, the "Manual

Alignment Operation Guide" window is displayed to perform the

jig mark (right) recognition on the nozzle stocker jig.

8.3 Nozzle Stocker Offset

0712-001