OM-1461-001_w.pdf - 第36页

33 0712-001 9.2 Preparation for Maintenance 9.2.2 Preparation for Lubrication Prepareforthespeciedtypesofgreaseandlubricationtools. SpeciedGreases • DAPHNE EPONEX GREASE No. 1 (IDEMITSU KOSAN) Note Before lub…

100%1 / 87
320712-001
9.2 Preparation for Maintenance
9.2 Preparation for Maintenance
9.2.1 Preparation for Cleaning
Prepare the following items.
• Rag
Use a rag made of such material as cotton, etc., that produces as less waste
thread as possible.
Notice
Ifanyberisleft,itmightcausethesystembreakdown.
• Oiled Rag
Use a rag made of such material as cotton, etc., that produces as less waste
thread as possible.
Too much grease should not be applied and any different type of grease
shouldnotbemixedintothespeciedone.
Notice
Ifanyberisleft,itmightcausethesystembreakdown.
• Air Gun
Donotusetheairgunforanyspotsthanthespeciedones.
If dirt and dust are dispersed, they may adhere to the sensors and moving
mechanisms, causing the machine to break down.
Fig. 8
330712-001
9.2 Preparation for Maintenance
9.2.2 Preparation for Lubrication
Prepareforthespeciedtypesofgreaseandlubricationtools.
SpeciedGreases
•
DAPHNE EPONEX GREASE No. 1 (IDEMITSU KOSAN)
Note
Before lubrication, wipe off old grease. Otherwise, the effect of grease and
oil will decrease.
Same Types of Lubricants
•
Grease Types equivalent to DAPHNE EPONEX GREASE No. 1
(IDEMITSU KOSAN)
Table 2
Grease Names Makers
Alvania Grease No. 1 Showa Shell Sekiyu K.K
Multinoc Grease No. 1 NIPPON OIL CORPORATION
Jomo Lisonix Grease No. 1 JAPAN ENERGY CORPORATION
Dynamax No. 1 COSMO OIL LUBRICANTS CO., LTD.
Lithtan No. 1 ESSO OIL
MP Grease No. 1 KYGNUS
Gemico MP No. 1 TonenGeneral Sekiyu K.K
Multemp PS1 KYODOH YUSHI CO., LTD.
340712-001
9.2 Preparation for Maintenance
Speciedlubricationtools
(1) Brush
Use a brush whose bristles do not come off if possible.
(2) Vinyl Gloves
Use a pair of vinyl gloves to apply grease and oil by hand.
(3) Syringe
Standard : 10 ml SS-10-LZ
Part No. : 630 133 3793
Maker : TERUMO CORPORATION
Appearance
1
2
3
4
5
6
7
8
9
10
12
mL
SINGLE USE ONLY
TERUMO
Fig. 9
Table 3
Standard Shape Part No. Remarks
Syringe 630 133 3793
Maker
: TERUMO CORPORATION
10 ml SS-10-LZ
No.19
(Color : Brown)
630 062 2621
Maker
: Nipro
Inside Diameter
:
φ
0.79
Length
: 65 mm Flattened End