LA 404-2 Pattern Controller Manual.pdf - 第8页
LA 404-2 Patt ern Control Sys tem 2 P/N 7 1 19995A 2006 Nordson Corporation LA 4 04- 2 Is sued 12/06 Responsibilities of the Equ ipmen t Ow ner Equipment owners are responsible for managing safety information, ensuring t…
LA 404-2 Pattern Control System
1
P/N 7119995A
2006 Nordson Corporation
LA 404-2
Issued 12/06
LA 404-2 Pattern Control System
Safety
Read this section before using the equipment. This section contains
recommendations and practices applicable to the safe installation,
operation, and maintenance (hereafter referred to as “use”) of the product
described in this document (hereafter referred to as “equipment”). Additional
safety information, in the form of task-specific safety alert messages,
appears as appropriate throughout this document.
WARNING: Failure to follow the safety messages, recommendations, and
hazard avoidance procedures provided in this document can result in
personal injury, including death, or damage to equipment or property.
Safety Alert Symbols
The following safety alert symbol and signal words are used throughout this
document to alert the reader to personal safety hazards or to identify
conditions that may result in damage to equipment or property. Comply with
all safety information that follows the signal word.
WARNING: Indicates a potentially hazardous situation that, if not avoided,
can result in serious personal injury, including death.
CAUTION: Indicates a potentially hazardous situation that, if not avoided,
can result in minor or moderate personal injury.
CAUTION: (Used without the safety alert symbol) Indicates a potentially
hazardous situation that, if not avoided, can result in damage to equipment
or property.
LA 404-2 Pattern Control System
2
P/N 7119995A
2006 Nordson Corporation
LA 404-2
Issued 12/06
Responsibilities of the Equipment Owner
Equipment owners are responsible for managing safety information,
ensuring that all instructions and regulatory requirements for use of the
equipment are met, and for qualifying all potential users.
Safety Information
Research and evaluate safety information from all applicable sources,
including the owner-specific safety policy, best industry practices,
governing regulations, material manufacturer’s product information, and
this document.
Make safety information available to equipment users in accordance
with governing regulations. Contact the authority having jurisdiction for
information.
Maintain safety information, including the safety labels affixed to the
equipment, in readable condition.
Instructions, Requirements, and Standards
Ensure that the equipment is used in accordance with the information
provided in this document, governing codes and regulations, and best
industry practices.
If applicable, receive approval from your facility’s engineering or safety
department, or other similar function within your organization, before
installing or operating the equipment for the first time.
Provide appropriate emergency and first aid equipment.
Conduct safety inspections to ensure required practices are being
followed.
Re-evaluate safety practices and procedures whenever changes are
made to the process or equipment.
LA 404-2 Pattern Control System
3
P/N 7119995A
2006 Nordson Corporation
LA 404-2
Issued 12/06
User Qualifications
Equipment owners are responsible for ensuring that users:
receive safety training appropriate to their job function as directed by
governing regulations and best industry practices
are familiar with the equipment owner’s safety and accident
prevention policies and procedures
receive, equipment- and task-specific training from another qualified
individual
NOTE: Nordson can provide equipment-specific installation,
operation, and maintenance training. Contact your Nordson
representative for information
possess industry- and trade-specific skills and a level of experience
appropriate to their job function
are physically capable of performing their job function and are not
under the influence of any substance that degrades their mental
capacity or physical capabilities
Applicable Industry Safety Practices
The following safety practices apply to the use of the equipment in the
manner described in this document. The information provided here is not
meant to include all possible safety practices, but represents the best safety
practices for equipment of similar hazard potential used in similar industries.
Intended Use of the Equipment
Use the equipment only for the purposes described and within the limits
specified in this document.
Do not modify the equipment.
Do not use incompatible materials or unapproved auxiliary devices.
Contact your Nordson representative if you have any questions on
material compatibility or the use of non-standard auxiliary devices.
Instructions and Safety Messages
Read and follow the instructions provided in this document and other
referenced documents.
Familiarize yourself with the location and meaning of the safety warning
labels and tags affixed to the equipment. Refer to Safety Labels and
Tags at the end of this section.
If you are unsure of how to use the equipment, contact your Nordson
representative for assistance.