Specification SIPLACE X-Series规格说明书1.pdf - 第21页
21 PCB Conveyor Productivity Lane (XPL) and Shuttle (XPS) SIPLACE X-Series Productivity Lane (XPL) Conveyor mode PCB wid th lane 1 [mm] PCB width XPL [mm] PCB wid th lane 2 [mm] XPL max. 154 max. 154 max. 154 a) Essentia…
20
PCB Conveyor
Conveyor Widths of the Flexible Dual Conveyor
Distance between outer con-
veyor edges: 535 mm, 2 tracks,
stationary outer conveyor edge
Distance between outer con-
veyor edges: 508 mm, 2 tracks,
stationary outer conveyor edge
Distance between outer con-
veyor edges: 468 mm, 2 tracks,
right conveyor edges are
stationary
a
Distance between outer con-
veyor edges: 535 mm, dual con-
veyor in Single conveyor mode,
right conveyor edge is
stationary
a
max. 250
Movable conveyor side
Stationary conveyor side
a) Only settings with stationary conveyor edge on the right are shown. A setting with the stationary conveyor edge on the left
is also possible. All dimensions in millimeters.
max. 250
267.5
535
min. 35
max. 236.5
254
508
min. 35 mm
max. 236.5
450
267.5182.5
max. 216.5
234
min. 35
max. 216.5
251.5
468
21
PCB Conveyor
Productivity Lane (XPL) and Shuttle (XPS)
SIPLACE X-Series Productivity Lane (XPL)
Conveyor mode PCB width
lane 1 [mm]
PCB width
XPL [mm]
PCB width
lane 2 [mm]
XPL max. 154 max. 154 max. 154
a) Essential for use with the Productivity Lane.
b) A shuttle is necessary if machines with a stationary left or right conveyor side are mixed together in a line.
SIPLACE X-Series
Productivity Shuttle
(XPS)
a, b
The shuttle module transfers
PCBs from up to three incom-
ing conveyor tracks to up to
three outgoing conveyor
tracks. The virtual PCB panel
coming in on a conveyor
track is transferred to an out-
going conveyor section. This
function for distributing the
PCBs on the shuttle is adjust-
able.
The “Productivity Lane”
option in the middle of the
PCB conveyor allows PCBs
to be overtaken in the place-
ment machine. As with the
Productivity Lift, the place-
ment machines are operated
in parallel. Shuttles at the
start and end of a cluster dis-
tribute the PCBs to be pro-
cessed to the required lane of
the PCB conveyor or to the
third conveyor lane.
22
PCB Conveyor
Productivity Shuttle (XPS)
Technical Data
Dimensions (LxW) 540 x 1000 mm²
Height 965 mm for 830 mm PCB transport height
1035 mm for 900 mm PCB transport height
1065 mm for 930 mm PCB transport height
1085 mm for 950 mm PCB transport height
Height with indicator lamp max. 1938 mm
Ground clearance 120 mm for 830 mm PCB transport height
190 mm for 900 mm PCB transport height
220 mm for 930 mm PCB transport height
240 mm for 950 mm PCB transport height
Weight 180 kg
Footprint 0.54 m²
Load per unit area 1.96 kN/m²
Number of machine feet 4
Maximum noise emissions 62 dB (A)
Room temperature between 15°C and 35°C
Atmospheric humidity 30 to 75 % (no higher than 45% on average to pre-
vent any possibility of condensation on the
machine)
Traversing path of the shuttle 560 mm
Number of belt segments 1
Width adjustment Stepping motor
PCB transport height 950 mm 50 mm
850 mm 50 mm (option)
PCB width 50 - 154 mm
Component-free PCB handling edge 3 mm
Interface between the input side/output side Siemens, SMEMA
Automatic tracking none
at the input side
at the output side
Electrical ratings
Supply voltage 230 VAC / 50 Hz
110 VAC / 60 Hz
Power consumption 0.4 kW
Fuses 1 x 6.3 A