KE2040Instruction Manual Ver2.01,REV04.2003.6.25.pdf - 第774页
10 − 11 10.4.2.2 Setting up each it em of Nozzle Operat ion Informat ion W hen you select the [Tool] command on the m enu bar, t he [Exchange f requency setup] command on the displayed menu, t hen the [Each nozzle] comma…
10 − 10
10.4.2 Nozzle operation information
10.4.2.1 Operation Information of each nozzle
When you select the [Windows] command on the menu bar, then the [Operation
Information of each nozzle] command on the displayed menu, the screen appears as
shown in Figure 10.4.2.1.1.
No. Item Description
1 NZL Change
Counts how many times the nozzle (specified with the ATC number) was
replaced.
2 Pick
Counts how many times the nozzle (specified with the ATC number) picked a
component totally.
3 Place
Counts how many times the nozzle (specified with the ATC number) placed a
component totally.
4 Exch. Err.
Counts how many times a replacement error occurred per a nozzle (specified
with the ATC number).
5 Pick Err.
Counts how many times a pick-up error occurred per a nozzle (specified with
the ATC number).
6 Retry
Counts how many times the nozzle (specified with the ATC number) performed
a retry.
7 LA Recog
Counts how many times an LA recognition error occurred at the nozzle
(specified with the ATC number).
8 V. Recog
Counts how many times a vision recognition error occurred at the nozzle
(specified with the ATC number).
9 Chip
Counts how many times a chip rise error occurred at the nozzle (specified with
the ATC number).
10 Dimension
Counts how many times an odd-shaped component error occurred at the nozzle
(specified with the ATC number).
11 Vrfy
Counts how many times a verify error occurred at the nozzle (specified with the
ATC number).
12 Cpla
Counts how many times a coplanarity error occurred at the nozzle (specified
with the ATC number).
Figure 10.4.2.1.1. Nozzle Operation Information
10 − 11
10.4.2.2 Setting up each item of Nozzle Operation Information
When you select the [Tool] command on the menu bar, the [Exchange frequency
setup] command on the displayed menu, then the [Each nozzle] command, the screen
appears as shown in Figure 10.4.2.2.1.
If you manually change the ATC nozzle assignment, you can change data on each
nozzle.
Figure 10.4.2.2.1 Exchange frequency setup dialog box
Figure 10.4.5.2.2 Exchange frequency setup dialog box
10 − 12
− The "Exchange frequency setup dialog box" above allows you to select data to be
reset with a keyboard or mouse, then select the [Reset] on the pop-up menu
which is displayed by your clicking the right button to reset the selected data.
- When you click the <Reset> button displayed on the bottom of the dialog box
above, the system allows you to reset data also, then the following dialog box
appears on the screen.
Figure 10.4.2.2.3 Frequency resetting confirmation dialog box
- When you click the <OK> button, the selected data is reset. When you click the
<Cancel> button, the system does not reset the selected data.
When you click the [All Reset] on the pop-up menu shown in Figure 10.4.2.2.2, the
following dialog box appears on the screen.
Figure 10.4.2.2.4 All frequency data resetting confirmation dialog box
- When you click the <OK> button on the dialog box above, the system resets all of
the operation information of each nozzle. When you click the <Cancel> button,
the system does not reset any data.