00194655-01.pdf - 第50页
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis 05/2005 Edition 50 If you did not move the tray supplies into the lowest position before the conversion: 2 : Move the two tray supplies into the bot…
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
49
: Open the cassette lock.
2
2
: Remove all the cassettes.
2
Note the assignment of the cassettes. 2
2
2
2
Cassette lock
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
50
If you did not move the tray supplies into the lowest position before the conversion: 2
: Move the two tray supplies into the bottom position by turning the top spindle.
2
The tray supplies can be moved quickly using a cordless screwdriver. 2
2
2
: Loosen the two screws on both sides of the MTC2.
The screws must only be loosened. Do not remove them.
2
2 screws
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
51
: Loosen the two screws on both sides of the MTC2.
2
2
: Remove the plug on the front of the wall between the tray supplies (2 screws).
2
2
2
2 screws
Plug