00194655-01.pdf - 第65页
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis 05/2005 Edition 65 : Insert the top locating bearin g so that the spindle (af ter being inserted) doe s not have too much clearance. 2 2 Insert the …
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
64
: Lift up the tray supply and insert the device needed to hold the tray supply up.
: Loosely tighten the screws of the spindle nut block.
: Move the spindle nut to a height that allows the middle pin to be fitted.
: Insert the pin. The pin has phase at the back and thread at the front.
Turn the spindle so that the pin slips in. The clearance is 0.2 mm.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
65
: Insert the top locating bearing so that the spindle (after being inserted) does not have too much
clearance.
2
2
Insert the locating bearing
Polished side down
Unpolished side up
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
66
: Insert the locking screw and tighten it.
2
2
: Turn the tray supply upwards into its end position using the cordless screwdriver.
: Tighten the screws of the spindle nut block using a diagonal sequence.
2
Locking screw
4 screws