00194655-01.pdf - 第60页
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis 05/2005 Edition 60 : Remove the four screws from the spindle nu t block (see photograph). 2 : Loosen the bottom four screws on the bear ing flange. …
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
59
: Loosen the 6 screws at the bottom of the spindle.
2
2
: Unscrew the spindle nut.
2
2
6 screws
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
60
: Remove the four screws from the spindle nut block (see photograph).
2
: Loosen the bottom four screws on the bearing flange.
2
4 screws
Turn the tray supply down and
remove the spindle.
4 screws
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
61
: Place the tray supply on the device and remove the spindle nut block.
: If the pin of the spindle nut block cannot be detached, use a punch to remove it.
2
2
2
2
2