00194655-01.pdf - 第58页
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis 05/2005 Edition 58 : Remove the top locating bearing. 2 Pull the top locatin g bearing off carefully using a s tripping tool. Make sure that you do …
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
57
: Unscrew the locking screw on both sides.
2
2
: On both sides, remove the groove nut using a groove nut spanner and a fork wrench.
The photograph below shows which way to turn the spanners.
2
2
2
2
2
Locking screw
Groove nut
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
58
: Remove the top locating bearing.
2
Pull the top locating bearing off carefully using a stripping tool. Make sure that you do not
lose the balls. 2
2
: Remove the 4 screws and remove the angled plate.
2
2
2
2
2
2
2
2
2
2
2
4 screws
Angled plate
Locating bearing
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
59
: Loosen the 6 screws at the bottom of the spindle.
2
2
: Unscrew the spindle nut.
2
2
6 screws