00194655-01.pdf - 第59页
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis 05/2005 Edition 59 : Loosen the 6 screws at the bottom of the spindle. 2 2 : Unscrew the spindle nut. 2 2 6 screws
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
58
: Remove the top locating bearing.
2
Pull the top locating bearing off carefully using a stripping tool. Make sure that you do not
lose the balls. 2
2
: Remove the 4 screws and remove the angled plate.
2
2
2
2
2
2
2
2
2
2
2
4 screws
Angled plate
Locating bearing
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
59
: Loosen the 6 screws at the bottom of the spindle.
2
2
: Unscrew the spindle nut.
2
2
6 screws
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
60
: Remove the four screws from the spindle nut block (see photograph).
2
: Loosen the bottom four screws on the bearing flange.
2
4 screws
Turn the tray supply down and
remove the spindle.
4 screws