00194655-01.pdf - 第67页
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis 05/2005 Edition 67 : Loosely tigh ten the four screws on the sp indle nut block using a diag onal sequence. 2 2 : Attached the angled plate and l oo…
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
66
: Insert the locking screw and tighten it.
2
2
: Turn the tray supply upwards into its end position using the cordless screwdriver.
: Tighten the screws of the spindle nut block using a diagonal sequence.
2
Locking screw
4 screws
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
67
: Loosely tighten the four screws on the spindle nut block using a diagonal sequence.
2
2
: Attached the angled plate and loosely tighten the four screws.
2
2
Tighten 4 screws
using diagonal
sequence
Service Manual: Replacement of ball screw for SIPLACE MTC2 lifting axis
05/2005 Edition
68
: Firmly tighten the screws of the top spindle nut block.
2
2
: Screw down the tray supply using the cordless screwdriver.
: Loosen the four screws on the spindle nut block and then tighten them again in a diagonal se-
quence to eliminate any twisting.
: Tighten the bottom four screws on the thrust bearing.
2
2
2
4 screws