00195813-08_IM_605_03_SP4_DE EN.pdf - 第34页
Station S oftware 60 5.03 SP4 / Ins tallation M anual Ausgabe 04/2013 E dition 34 5.4.7 Entering the Mac hine Identifica tion Number (MID) Figure 5- 21 : Entering the Machine Identific ation Number (MID) ► I n the text b…
Station Software 605.03 SP4 / Installation Manual Ausgabe 04/2013 Edition
33
5.4.6 Selecting the Hardware Configuration
The Hardwareconfiguration dialog box is opened, in which you can configure the hardware for
one-computer or two-computer operation. Two-computer operation has always to be selected for
X- and CA-series placement machines. For D-series placement machines the selection should
match the actual hardware configuration.
Figure 5-20: Selecting the hardware configuration
► Click on the One-computer-configuration button for one-computer operation.
Or
► Click on the Two-computer-configuration for two-computer operation.
► Click on the Next button.
Station Software 605.03 SP4 / Installation Manual Ausgabe 04/2013 Edition
34
5.4.7 Entering the Machine Identification Number (MID)
Figure 5-21: Entering the Machine Identification Number (MID)
► In the text box, enter the 8-digit machine identification number.
NOTICE
You will find the MID on an adhesive label on the side of the protective covers directly
below the label for the number of the relevant location. Only the first eight digits with
leading zeros must be entered. The number following the dash after the MID specifies
the location (e.g. 00000001-2 stands for location 2).
► Click the Next button.
NOTICE
The following screen only appears if applications are open which use files which must be
updated during installation of SIPLACE.
Figure 5-22: Open applications
Station Software 605.03 SP4 / Installation Manual Ausgabe 04/2013 Edition
35
► Close the applications listed here and then click the Retry button.
The installation program now installs the additional programs on the station computer
5.4.8 Finalizing the Installation
NOTICE
The status only lists the programs that have just been installed. If, for instance, the
current version of SIPLACE Vision was already installed, it is not listed here.
If errors occurred during installation, the status is indicated by the Error button being
displayed next to the program name instead of the Ok button.
► If you wish to read the log of the installation of any program, click the Ok (or Error) button next
to the name of the program. Notepad is started and displays the appropriate file.
Figure 5-23: Finalizing the installation
► Click the Finish button.
NOTICE
To establish the connection between the station computer and the machine controller
after installation has been completed, the station computer, machine controller and
Vision computer (if present) must first be run down and the machine must then be
switched off completely.
► To do this, open the Start menu and select Programs SIPLACE
Shutdown_Vision_MC_SR (all).